The humidity detector allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the humdity detector dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing capacity: 110 g / 3.88 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time

The humidity detector is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our humidity detector is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).

• Readability mass fraction of water: 0 … 100%
• Moisture measurement range: ± 0.1 … 100% (water mass fraction))
• Maximum permissible absolute error moisture measurement: Varies by material, lab test required
• Temperature range: +5 … +80 °C

The humidity detector is an oven-drying absolute moisture meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the humidity detector and the moisture content is subsequently calculated from the difference between the initial and final weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time

The humidity detector has a moisture measuring range of 0 … 100%. The humidity detector is operated via the 5" touchscreen. To determine the moisture content with the humidity detector, a sample is evenly distributed on the sample pan.

• Measuring range: 0 … 110 g / 0 … 3.88 oz
• Resolution: 0.001 g
• Memory for 32 drying parameters
• 5" touch screen for easy operation
• RS-232 interface for connection to a PC

The humidity detector is an absolute moisture meter or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The humidity detector uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the humidity detector can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.01 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.1 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles