£ 6,444.00
Price excl. VAT &. delivery
The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.
Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.
Suitable for determining the humidity of bulk substances, this absolute moisture sensor can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.
PCE-MWM 240-B Rod sensor (custom length 500 … 1500 mm)
Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, … is continuously measurable.
maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Absolute Moisture Meter is ideal for applications in the wood, agricultural and plastics industries, e.g. for shavings, animal feed or granulates. It delivers precise results even at very low moisture contents.
maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Absolute Moisture Meter works on the principle of drying with simultaneous weight recording whereas the weight loss is continuously measured and displayed as a percentage of the total mass.
plaster analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables precise and reliable moisture measurements. The Absolute Moisture Meter works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.
content in samples. It is suitable for applications in raw material extraction, production, processing, storage, trade, research and recycling. With a maximum sample weight of 200 g and a high resolution of 0.001 g, the Absolute Moisture Meter enables exact measurements of the moisture content and the ash residue.
various applications in raw material extraction, production, processing, research and recycling. With a maximum initial sample weight of 200 g and a high measuring resolution of 0.001 g, the Absolute Moisture Meter enables precise moisture measurement.
For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.
The moisture sensor is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture sensor is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).
plaster / gypsum analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables exact and reliable moisture measurements. The Absolute Moisture Meter works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.
For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.
material extraction, production, processing, research and recycling. With a maximum sample weight of 200 g and a high measuring resolution of 0.001 g, the Absolute Moisture Meter enables precise moisture measurement.
drying temperature of up to 360 °C. It is ideal for applications in raw material extraction, production, processing, research and recycling, as well as especially for building materials such as cement, concrete and gravel and the chemical industry, including powders, granulates and pastes. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, our Absolute Moisture Meter enables precise moisture measurement.
VHF-Band Moisture sensor Crushed soil, sand, stone, Gravel, Ore. The device is resistant to corrosion (stainless steel and dielectric materials) and can operate in the conditions deviating from the norm, for example, at temperatures of 250 °C. The moisture sensor probe can be mounted on the walls in the hoppers, in pipelines or on trays in conveyors. Due to pluggable design this version of the moisture sensor can also be used for soil moisture control.
drying temperature of up to 360 °C. It is ideal for applications in raw material extraction, production, processing, research and recycling as well as especially for building materials such as cement, concrete and gravel and the chemical industry, including powders, granulates and pastes. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Absolute Moisture Meter enables precise moisture measurement.
solid materials. It is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Absolute Moisture Meter enables precise moisture measurement.
and solid materials and is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Absolute Moisture Meter enables precise moisture measurement.
The Absolute Moisture Meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The Absolute Moisture Meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.
The absolute moisture meter PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the absolute moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.
The absolute moisture meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The absolute moisture meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.
