• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 24 V DC
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger
• incl. ISO-Calibration Certificate

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 110 ... 230 V AC, 50 / 60 Hz
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger
• incl. ISO-Calibration Certificate

• 0.9 to 35.0 m/s
• 2.5 to 126.0 km/h
• 1.4 to 68.0 knots
• 1.6 to 78.2 miles/h 
• incl. ISO-Calibration Certificate

The PCE-VA 20-SET is a multi-functional anemometer including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• incl. ISO Calibration Certificate

The PCE-HVAC 2 is a pitot tube anemometer that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile pitot tube anemometer. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter
• Includes ISO calibration certificate

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F
• incl. ISO-Calibration Certificate

The hot wire anemometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the hot wire anemometer can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø 9,3 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement
• incl. ISO Calibration Certificate (wind speed function only)

This anemometer is very economical. With this anemometer you can measure wind speed and air temperature.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
• Incl. ISO calibration certificate

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 110 ... 230 V AC , 50 / 60 Hz
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 24 V DC
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

Anemometer with port, memory, software for wind speed, temperature and air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

The pitot pipe anemometer is a reliable differential pressure gauge for pressure measurement of air in the range of ±20 kPa. The Anemometer can be used in combination with various pitot pipes what makes the instrument very useful in air flow measurements of industrial plants.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

• Measuring range up to 180 km / h
• Input: pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analog output
• Supply voltage: 24V DC
• Ambient temperature -20 … 70°C / -4 … 158°F
• units adjustable: km / h, mph, m / s

PCE-HVAC 2 is a pitot tube anemometer used to determine air velocity, air pressure, airflow, differential pressure and ambient temperature. The pitot tube anemometer allows access through tiny openings to take measurements in small pipe systems and other confined spaces.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min. and max. value memory
• Data logger and leak tester 
• Temperature measurement, flow measurement

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

This vane anemometer is used to measure air speed, air flow, air temperature and infrared (IR) temperature. This multi-functional portable handheld vane anemometer offers a quick response time, allowing for real-time measurement. In addition, the impeller features a thread for mounting in one location for fixed measurement.

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F

• Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
• Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory 
• Data logger and leak test 
• Temperature measurement, flow measurement

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

• Measuring range: -100 … +200 kPa / -14.5 …  +29 psi / -1 … +2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

• Anemometer / Anemometers for all applications, adjustable alarms
• supply voltage: 230 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

• Anemometer / Anemometers for all applications, adjustable alarms
• supply voltage: 24 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

• Indoor temperature: 0 ... 60°C
• Outdoor temperature: -40 ... 60°C
• Relative humidity: 10 ... 90%
• Wind speed: 0 ... 50 m/s
• Wind direction: 0 ... 360°
• Ambient pressure: 300 ... 1100 hPa
• Rainfall: 0 ... 9999 mm
• Illuminance: 0 ... 200 klx
• UV index: 1 ... 15
• Weather forecast and moon phase
• Integration into Weather data cloud possible

PCE-VA 20-SET is a multifunction anemometer with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the anemometer incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

PCE-VA 20 is a multifunction anemometer for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1

The hot wire anemometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the hot wire anemometer can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø 9,3 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement

Without a doubt, the main advantage of this handheld cup vane anemometer is that it doesn't need to be held exactly in the direction of the wind. Anemometer with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane anemometer, wind direction will not influence the measurement.

• 0.9 to 35.0 m/s
• 2.5 to 126.0 km/h
• 1.4 to 68.0 knots
• 1.6 to 78.2 miles/h