• Measurement Range: 0.1 … 5 m/s
• Resolution: 0.001 m/s
• Accuracy: 2%
• Pipe Size: DN8 / 1/4"
• Display Type: OLED
• Analog Output: 4 … 20 mA

• Measurement Range: 0.1 … 5 m/s
• Resolution: 0.001 m/s
• Accuracy: 2%
• Pipe Size: DN10 / 3/8"
• Display Type: OLED
• Analog Output: 4 … 20 mA

• Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
• Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
• Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
• Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
• Frequency range: 10 Hz … 1 kHz 
• Needle probes: 10mm / 0.39" // 45mm / 1.77"
• incl. ISO-Calibration Certificate

ISO calibration certificate for torque meters, certifies the accuracy and is often required to comply with DIN ISO 9000. The test is carried out in both directions (left and right rotation).

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this we give the measuring device to our in-house calibration laboratory. You as the client, the measured values and the serial number are recorded in this ISO calibration certificate.

N.B. calibration certificates are issued specifically for the customer and are non-returnable.

Temperature sensor for foundry applications

• Tmax.: 1260 °C / 2300 °F
• Accuracy: ±1.5 °C
• 2 fixed measuring tips
• Measuring hot metal surfaces, fresh castings
• Sensor length 500 mm / 19.6"
• Length of measuring tip 50 mm / 1.9"
• Type K thermocouple

ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this we give the measuring device to our in-house calibration laboratory. You as the client, the measured values and the serial number are recorded in this ISO calibration certificate.

1 point: 159.2 Hz; 10mm/s; 14.1 m/s²; 0.028mm; 1 - 4 channels

N.B. calibration certificates are issued specifically for the customer and are non-returnable.

CAL-V-III is an ISO calibration certificate.

• Includes device testing and calibration performed by a laboratory
• Certificate lists all measured values, confirming the device meets the applicable ISO standard(s)
• Each ISO calibration certificate is personalized for the customer; therefore, ISO calibration certificates are exempt from the right of return

• Special pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 12 mm
• Temperature range: 0 ... 60 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: pH measurement in low-ion media

• Laboratory pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 6 mm
• Temperature range: 0 ... 50 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Tris buffer, test tubes

ISO calibration certificate for torque meters, certifies the accuracy and is often required to comply with DIN ISO 9000. The test is carried out in one direction only (left or right rotation can be freely selected)

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

• Laboratory pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 12 mm
• Temperature range: 0 ... 80 °C 7 32 ... 176 °F
• Shaft / sensor material: Glass
• Connection: BNC
• Shaft / sensor material: Glass
• Application: especially wine, beer

Screw-in sensor with T-handle for solid or frozen materials with 1m cable (removable)

• Tmax: 200 °C / 392 °F
• Accuracy: ± 1.5 °C
• Diameter: Ø 6.0 mm
• Length: 130 mm
• Thermocouple Type K

• pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 6 mm
• Temperature range: 0 ... 80 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application:
  Laboratory flasks, test tubes

• Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
• Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
• Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
• Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
• Frequency range: 10 Hz … 1 kHz 
• Needle probes: 10mm / 0.39" // 45mm / 1.77"

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration
• Portable and battery operated
• Needle probe: 45 mm / 1.77 in

• To comply with your DIN ISO 9000 quality management system.
• Calibration check on certified black bodies.
• Checked over the measuring range of the thermal imager, but without indication of the measuring points in the certificate.

• Standard pH electrode
• Measuring range: 0 ... 14 pH
• Diameter: 9 mm
• Temperature range: 0 ... 130 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Waste water, sludge

• pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 12 mm
• Temperature range: -5 ... 100 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: General laboratory applications

Certificate, e.g. for compliance with your DIN ISO 9000. For this purpose, we send the pressure gauge to an independent calibration laboratory. The measured values, the serial number and you as the client are recorded on this ISO certificate.

• 10 measuring points evenly distributed over the measuring range
• (up / down / max. 20 bar)
• for the sensors:   PS-100-5 (5 bar)   PS-100-20 (20 bar)N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.

ISO calibration certificate for magnetic field tester, is often prescribed in companies to comply with DIN ISO 9000.

2 calibration points: 0 +/- 1% 1847 mT +/- 4%

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

ISO calibration certificate for vibration measuring devices, for example of the PCE-VT series, PCE-VM series or PCE-MSR series, e.g. to comply with your DIN ISO 9000

1 point calibration for vibration measuring devices at: 159.2 Hz; 10 mm/s; 14.1 m/s²; 0.028 mm

N.B. calibration certificates are issued specifically for the customer and are excluded from the right of return.

• Range: 0 … 14 pH
• Material: glass with stainless steel blade
• Temperature range: 0 … 60 °C
• Connector: BNC
• Cable: 1 m

an ISO calibration certificate for hardness testers.

• Certificate lists all measured values, confirming the device meets the applicable ISO standard(s)
• Each ISO calibration certificate is personalized for the customer; therefore, ISO calibration certificates are exempt from the right of return
• Based on DIN EN 12504-2:2021

Temperature sensor for Krebs viscometers PCE-RVI 2

• Temperature sensor: Resistance
• Temperature measurement measuring range: 0 … 100°C / 32 … 212°F
• Temperature measurement accuracy: 0.1°C / 0.18°F