Due to its compact design, the PCE-2550-ICA metal hardness tester is easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the metal hardness tester is very versatile.

• Measuring ranges: 170 … 960 HLD
• Measurement direction: 360°
• Impact device: Type D
• Measurement units: HL, HB, HRB, HRC, HRA, HV, HS
• Internal measurement memory
• incl. ISO Calibration Certificate

The PCE-TG 300-NO2 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO7 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

PCE-1000N is a portable handheld Barcol hardness tester used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.

• Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster  (HW)  Rockwell (HRB / HRE / HRF / HRH)
• Measuring range: 0 … 100 HBA / 25 … 150 HB
• Accuracy: 81 … 88 HBA: ± 1 HBA / 42 … 48 HBA: ± 2 HBA
• Repeatability: 81 … 88 HBA: ± 1.5 HBA / 42 … 48 HBA: ± 2.5 HBA
• Resolution: 0.1 HBA
• Meets ASTM standards: E140-97; D2583-75; B648-78

The PCE-TG 300-NO5 is a NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth

• Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
• Accuracy: ±0.5% of measured value + 0.05 mm
• Memory capacity: 1500 measured values
• Calibration reference on housing
• High temperature probe: -10 … 350 °C / 14 …  662 °F
• incl. ISO-Calibration Certificate

The PCE-TG 300-NO5/90 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth

PCE-VE 333HR is an industrial borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head of this type of borescope features 6 LED lights (4 front, 2 side) for better illumination when using the mirrors. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

• With boost function: better images in dark surroundings
• 2 additional side LEDs for better lighting
• Image rotation possible
• Diameter: Ø 6 mm / 0.24", length: 3 m / 9ft 10"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• Measuring range: 2 ... 1000 µm
• Resolution: 0.1 µm
• for FE metals
• Wireless interface for Windows, iOS and Android
• OLED display
• IP64 housing

• Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
• Accuracy: ±0.5% of measured value + 0.05 mm
• Memory capacity: 1500 measured values
• Calibration reference on housing
• High-temperature probe: -10 … 350 °C / 14 …  662 °F

The PCE-VE 320HR is an industrial borescope, inspection device or industrial endoscope camera for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head of this kind of borescope features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

• Diameter camera head: Ø 5.5mm / 0.22"
• Cable length: 1 m / 3ft 3"
• With boost function: better images in dark surroundings
• 2 additional side LEDs for better lighting
• Image rotation possible
• Interface: Mini-USB 1.1 und AV out
• Memory: 8 GB SD memory card (incl.)