Skip to main content
Air Quality Carbon Dioxide Meter PCE-WMM 50-ICA incl. ISO Calibration Cert.
£ 534.00
Price excl. VAT &. delivery
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted air quality carbon dioxide meter that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality carbon dioxide meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

Car Measuring Device PCE-DSX 20-ICA Incl. ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration
The car measuring device PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
  • Incl. ISO calibration certificate
Carbon Dioxide Gas Leak Detector PCE-WMM 50-ICA incl ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted carbon dioxide gas leak detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor carbon dioxide gas leak detector features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

Carbon Dioxide Meter PCE-WMM 50-ICA incl. ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted carbon dioxide meter that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor carbon dioxide meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

CO2 Analyzer PCE-WMM 50-ICA incl. ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted CO2 analyzer that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor CO2 analyzer features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

Condition Monitoring Stroboscope PCE-DSX 20-ICA Incl ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration
The condition monitoring stroboscope is mostly used for speed or vibration measurement or for motion observations. This condition monitoring stroboscope has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
  • Incl. ISO calibration certificate
Gas Detector PCE-WMM 50-ICA incl. ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

Handheld Tachometer PCE-DSX 20-ICA Incl. ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration
The handheld tachometer PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This handheld tachometer  has a small design and has a low weight. Thus, the handheld tachometer can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
  • Incl. ISO calibration certificate
Stroboscope PCE-DSX 20-ICA Incl. ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration
The stroboscope light PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This stroboscope light has a small design and has a low weight. Thus, the stroboscope light can be conveniently used even in measurements in hard to reach places.

  • Flash frequency: 50 … 35000 FPM
  • Accuracy: ±(0.05% of measured value + 2 Dgt)
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • with trigger input
  • Incl. ISO calibration certificate
Tachometer PCE-DSX 20-ICA Incl. ISO Calibration Certificate
£ 534.00
Price excl. VAT &. delivery
ISO Calibration
The tachometer PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This tachometer has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
  • Incl. ISO calibration certificate
Dissolved Oxygen Meter PCE-PHD-1-KIT1
£ 532.00
Price excl. VAT &. delivery

The Dissolved Oxygen Meter is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 


  • Measuring range: pH value: 0.00 … 14.00 pH
  • Conductivity: 0 … 200 µS/cm…
  • TDS: 0 … 132 ppm, 132 … 1320 ppm…
  • Oxygen: 0 … 20.0 mg/l 
  • Temperature: 0 … 60.0 °C / 32 … 140 ºF
  • 2 point calibration, pH4 + pH7
  • incl. Storage solution
  • incl. pH4 + pH7
  • incl. Electrolyte solution
  • incl. Conductance solution
  • incl. Carrying case

Multifunction Conductivity Meter PCE-PHD-1-KIT1
£ 532.00
Price excl. VAT &. delivery

The Multifunction Conductivity Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction conductivity meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 


  • Measuring range: pH value: 0.00 … 14.00 pH
  • Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
  • TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
  • Oxygen: 0 … 20.0 mg/l 
  • Temperature: 0 … 60.0 °C / 32 … 140 ºF
  • 2 point calibration, pH4 + pH7
  • incl. Storage solution
  • incl. pH4 + pH7
  • incl. Electrolyte solution
  • incl. Conductance solution
  • incl. Carrying case

Multifunction pH Meter PCE-PHD-1-KIT1
£ 532.00
Price excl. VAT &. delivery

The multifunction pH meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction pH meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 


  • Measuring range: pH value: 0.00 … 14.00 pH
  • Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
  • TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
  • Oxygen: 0 … 20.0 mg/l 
  • Temperature: 0 … 60.0 °C / 32 … 140 ºF
  • 2 point calibration, pH4 + pH7
  • incl. Storage solution
  • incl. pH4 + pH7
  • incl. Electrolyte solution
  • incl. Conductance solution
  • incl. Carrying case

pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1
£ 532.00
Price excl. VAT &. delivery

The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 


  • Measuring range: pH value: 0.00 … 14.00 pH
  • Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
  • TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
  • Oxygen: 0 … 20.0 mg/l 
  • Temperature: 0 … 60.0 °C / 32 … 140 ºF
  • 2 point calibration, pH4 + pH7
  • incl. Storage solution
  • incl. pH4 + pH7
  • incl. Electrolyte solution
  • incl. Conductance solution
  • incl. Carrying case

Salt MeterPCE-PHD-1-KIT1
£ 532.00
Price excl. VAT &. delivery

The Salt Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable Salt Meteris used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 


  • Measuring range: pH value: 0.00 … 14.00 pH
  • Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
  • TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
  • Oxygen: 0 … 20.0 mg/l 
  • Temperature: 0 … 60.0 °C / 32 … 140 ºF
  • 2 point calibration, pH4 + pH7
  • incl. Storage solution
  • incl. pH4 + pH7
  • incl. Electrolyte solution
  • incl. Conductance solution
  • incl. Carrying case

Water Analysis Meter PCE-PHD-1-KIT1
£ 532.00
Price excl. VAT &. delivery

The water analysis meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable water analysis meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 


  • Measuring range: pH value: 0.00 … 14.00 pH
  • Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
  • TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
  • Oxygen: 0 … 20.0 mg/l 
  • Temperature: 0 … 60.0 °C / 32 … 140 ºF
  • 2 point calibration, pH4 + pH7
  • incl. Storage solution
  • incl. pH4 + pH7
  • incl. Electrolyte solution
  • incl. Conductance solution
  • incl. Carrying case

Condition Monitoring Thermometer PCE-HPT 1-ICA incl. ISO Calibration Certificate
£ 530.00
Price excl. VAT &. delivery
ISO Calibration

 

The condition monitoring thermometer with microprocessor is a high precision 1-channel temperature gauge. The condition monitoring thermometer with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

 

  • 1 channel temperature recorder
  • Automatic shutdown
  • High accuracy of ± 2% r.H.
  • Sampling rate of 2 / sec
  • Memory size: 5,000 values
  • Incl. ISO calibration certificate

 

Contact Thermometer PCE-HPT 1-ICA incl. ISO Calibration Certificate
£ 530.00
Price excl. VAT &. delivery
ISO Calibration

The contact thermometer with microprocessor is a high precision 1-channel temperature gauge. The contact thermometer with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

  • 1 channel temperature recorder
  • Automatic shutdown
  • High accuracy of ± 2% r.H.
  • Sampling rate of 2 / sec
  • Memory size: 5,000 values
  • Incl. ISO calibration certificate