[zoom]
[zoom]
[zoom]
[zoom]
[zoom]
₹24,465.00
The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).
| Hardness | |
| Measuring range | 0 ... 100 Shore A |
| Resolution | 0,1 Shore A |
| Accuracy | <±1 Shore A |
| General technical data | |
| Measuring functions | MAX, Average value |
| Measuring principle | Spring load |
| Storage medium | Internal memory |
| Storage capacity | 500 Measurements |
| Interface | Mini-USB |
| Standard(s) | GB/T 531.1, ISO7619-1, ASTM D 2240 |
| Operating time | 20 h |
| Charging time | 3 h |
| Impact device | D-type |
| Dimensions | Indentor / geometry: - Spring pin diameter: 1.25 ± 0.1 mm - Ball diameter: 0.79 ± 0.03 mm - Cone angle (tip angle): 35 ± 0.25° |
| Menu language | English, English (GB) |
| Protection class (device) | IP20 |
| Power supply | 3.6V |
| Connector type | Device-europlug |
| (Rechargeable) battery | 3 x 1,2 V AAA rechargeable battery , Nickel-metal hydride battery |
| Capacity | 1200 mAh |
| Operating conditions | 0 ... 50 °C , 20 ... 85 % RH |
| Storage conditions | 0 ... 50 °C , 20 ... 85 % RH |
| Dimensions ( L x W x H ) | 153 x 50 x 29 mm |
| Weight | 170 g |
