- Pressure Sensor

The simple pressure sensor PCE-PS 420 can be used everywhere where simple pressure is to be measured. The measured pressure is provided as a 4 … 20 mA analog value on the pressure sensor.

• Max. 400 Bar (selectable)
• 4 … 20 mA output
• Media: non-corrosive gases and liquids
• Pressure: relative
• Diaphragm: Ceramics
• Accuracy class: 1

The stainless steel immersion pressure / fill level sensor is suitable for measuring the level in the process. The immersion probe is particularly suitable for level measurement of waste water, contaminated or highly viscous media.

• Nominal pressures up to 200 mH2O
• Accuracy ± 0.35% of the measuring range
• 39.5 mm diameter
• Suitable for drinking water production
• Ceramic sensor
• Suitable for dirty and viscous media
• Different configurations possible

The pressure / fill level sensor is based on a ceramic measuring cell. This level sensor was developed for the measurement of levels in waste water, polluted and highly viscous media. As a special feature of this level sensor, the probe and cable part can be separated from one another.

• Nominal pressures up to 100 mH2O
• Accuracy ± 0.35% of the measuring range
• 39.5 mm diameter
• Suitable for sewage, fuels and water
• Ceramic sensor
• Different configurations possible

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

The pressure sensor is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure sensor is versatile.

• Measuring range: 0 … 2900 psi, 0 … 200 bar
• Resolution: 1.45 psi, 0.1 bar
• Scaled bar graph
• Measurable media: gases, water
• incl. ISO Calibration Certificate

• Pressure range: -0.088 ... +1.6 MPa
• High accuracy: 0.05 % FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• High accuracy: 0.05 % FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• High accuracy: 0.05% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm