The Air and Temperature Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F
• USB interface
• Incl. ISO Calibration Certificate

The Air Flow Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F
• USB interface
• Incl. ISO Calibration Certificate

The Air Velocity Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F
• USB interface
• Incl. ISO Calibration Certificate

Current clamp for measuring AC/DC current, AC voltage and resistance. This current clamp is designed to indirectly detect AC/DC current and ohms. The current clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The current clamp comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
• Incl. ISO Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate

The Flow Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F
• USB interface
• Incl. ISO Calibration Certificate

This 1-Phase-Power Meter is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacturer ISO calibrated.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records
• incl. ISO Calibration Certificate