• Measuring range: 0.00 ... 0.400% BAC
• Resolution: 0.001% BAC
• Accuracy: 0.015% BAC
• Traffic light display for alcohol values with warning signal
• Fast results in approx. 10 s
• Voice output
• Memory for 100 values

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC at 50 /  60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

This Condition Monitoring Phase Rotation Meter has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the Condition Monitoring Phase Rotation Meter. The Condition Monitoring Phase Rotation Meter meets the safety standard CAT III 600 V, IEC 61010.

• Easy operation
• No batteries required
• Robust alligator clips for easy connection
• 3-phase measurements of 40 … 690 V AC
• Protection class IP 40