₹994,332.00
Price excl. VAT &. delivery
PCE-COM 20-ICA is a portable handheld non-destructive surface testing - conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.
The Class 1 outdoor road noise / traffic noise meter PCE-430-EKIT-ICA with integrated data logger meets all requirements for noise measurement and frequency analysis. This integrated precision pulse outdoor road noise / traffic noise meter kit follows all valid standards and guidelines, and is designed for use outdoors in all weather. Typical applications are the measurement of workplace noise, compliance, environmental noise detection, selection of hearing protector selection, selection of appropriate noise abatement measures and noise exposure estimation.
The class 2 outdoor condition monitoring sound level meter, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The outdoor condition monitoring sound level meter is equipped with an octave band frequency filter. Optionally, the outdoor condition monitoring sound level meter can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with a sound level meter over a long period of time, even in the rain.
The 4-channel Condition Monitoring Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the Condition Monitoring Vibration Meter is able to record vibrations at different points of the component to be tested.
PCE-432-ICA is a class 1 data logging decibel meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy decibel meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The decibel meter calculates the equivalent continuous sound level Leq (LXeq).
PCE-432-ICA is a class 1 data logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy noise meter / sound meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The noise meter / sound meter calculates the equivalent continuous sound level Leq (LXeq).
PCE-432-ICA is a class 1 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The sound level meter calculates the equivalent continuous sound level Leq (LXeq).
PCE-432-ICA is a class 1 data logging SPL meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy SPL meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The SPL meter calculates the equivalent continuous sound level Leq (LXeq).
PCE-432-ICA is a class 1 sound level data logger that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level data logger is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The sound level data logger calculates the equivalent continuous sound level Leq (LXeq).
PCE-432-ICA is a Condition Monitoring Class 1 Sound Level Meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy Condition Monitoring Class 1 Sound Level Meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The Condition Monitoring Class 1 Sound Level Meter calculates the equivalent continuous sound level Leq (LXeq).
PCE-430 is a class 1 data-logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy class 1 data-logging noise meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.
The class 2 data logging decibel meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The decibel meter is a class 2 device and is equipped with an octave band frequency filter. The decibel meter can optionally be upgraded with a 1/3 octave band filter.
The class 2 data logging SPL meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The SPL meter is a class 2 device and is equipped with an octave band frequency filter. The SPL meter can optionally be upgraded with a 1/3 octave band filter.
The data Logger with USB interface is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The data Logger with USB interface is a class 2 device and is equipped with an octave band frequency filter. The data Logger with USB interface can optionally be upgraded with a 1/3 octave band filter.
The environmental meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental meter is a class 2 device and is equipped with an octave band frequency filter. The environmental meter can optionally be upgraded with a 1/3 octave band filter.
The environmental tester is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is a class 2 device and is equipped with an octave band frequency filter. The environmental tester can optionally be upgraded with a 1/3 octave band filter.
The sound level data logger is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The sound level data logger is a class 2 device and is equipped with an octave band frequency filter. The sound level data logger can optionally be upgraded with a 1/3 octave band filter.
The class 2 data logging sound level meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The sound level meter is a class 2 device and is equipped with an octave band frequency filter. The sound level meter can optionally be upgraded with a 1/3 octave band filter.
ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this we give the measuring device to our in-house calibration laboratory. You as the client, the measured values and the serial number are recorded in this ISO calibration certificate.
N.B. calibration certificates are issued specifically for the customer and are non-returnable.
PCE-428 is a class 2 data logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy noise meter / sound meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The noise meter / sound meter calculates the equivalent continuous sound level Leq (LXeq).
The condition monitoring data logging device is used to determine volume. The condition monitoring data logging device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the condition monitoring data logging device. In addition, the condition monitoring data logging device has an SD card slot that enables the use of an SD card as an additional storage medium.
This air flow meter is very economical. With this air flow meter you can measure wind speed and air temperature.
This wind speed meter is very economical. With this wind speed meter you can measure wind speed and air temperature.
This air velocity meter is very economical. With this air velocity meter you can measure wind speed and air temperature.
This airwheel wind measurer is very economical. With this airwheel wind measurer you can measure wind speed and air temperature.
The temperature meter has a measuring range of -80 … +70 °C. The temperature meter is therefore suitable for monitoring particularly cold environments.
This anemometer is very economical. With this anemometer you can measure wind speed and air temperature.
This flow meter is very economical. With this flow meter you can measure wind speed and air temperature.
The Condition Monitoring Belt Tension Meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The Condition Monitoring Belt Tension Meter measures the tension of the belt in a stationary state.
This environmental meter is very economical. With this environmental meter you can measure wind speed and air temperature.