Products for 'Voltmeter Metrix MX 20 HD '

₹57,273.00

Price excl. VAT &. delivery

This voltmeter combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this voltmeter is also equipped with a frequency and capacitance measurement.

Automatic range selection
Capacitance measurement
Integrated isolation tester
Internal memory
To IEC 1010, CAT III 1000 V, CAT IV 600 V
Frequency measurement

Voltmeter PCE-ITM 20

₹57,273.00

Price excl. VAT &. delivery

This Voltmeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this Voltmeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.

Automatic range selection
Capacitancemeasurement
Integrated isolation tester
Internal memory
To IEC 1010, CAT III 1000V, CAT IV 600V
Frequency measurement

Colorimeter PCE-CSM 20

₹785,649.00

Price excl. VAT &. delivery

PCE-CSM 20 is a handheld colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the colorimeter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The colorimeter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer

2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Spectrophotometer PCE-CSM 20

₹785,649.00

Price excl. VAT &. delivery

PCE-CSM 20 is a handheld spectrophotometer used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 20 offers a long battery life, a 4-color lamp with long life and an easy-to-use portable design. The PCE-CSM 20 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer

2000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Defectoscope PCE-FD 20

₹684,316.00

Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic defectoscope with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based defectoscope uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

Operating frequency range: 1 … 10 MHz
Measured time interval range: 6 … 1000 microseconds (µs)
Sound velocity: 1000 … 9999 m/s

Color Meter PCE-CSM 20

₹785,649.00

Price excl. VAT &. delivery

PCE-CSM 20 is a handheld color meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the color meter offers a long battery life, 4-color lamp and an easy-to-use portable design. The color meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable for data transfer

2000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50

Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB

IoT Meter PCE-CSM 20

₹785,649.00

Price excl. VAT &. delivery

PCE-CSM 20 is a handheld IoT meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the IoT meter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The IoT meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer

2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Voltmeter PCE-GPA 50

₹113,222.00

Price excl. VAT &. delivery

The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeterPCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple

Conductivity Tester for Metals PCE-COM 20

₹874,929.00

Price excl. VAT &. delivery

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration

NDT Test Instruments PCE-COM 20

₹874,929.00

Price excl. VAT &. delivery

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration

Material Tester for Metals PCE-COM 20

₹874,929.00

Price excl. VAT &. delivery

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration

Gas Detector PCE-LDC 20

₹772,257.00

Price excl. VAT &. delivery

The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments

Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

Leak Detector PCE-LDC 20

₹772,257.00

Price excl. VAT &. delivery

The leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments

Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

NDT Tester PCE-LDC 20

₹772,257.00

Price excl. VAT &. delivery

The NDT tester for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments

Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

Voltmeter PCE-CBA 20

₹12,038.00

Price excl. VAT &. delivery

The Voltmeter tests 12V and 24V starter batteries. The voltmeter checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling.

Measurement object: 12V / 24V starter batteries
Battery standards: DIN, JIS, EN, SAE
Power supply: 9 … 35V DC via test voltage

Flaw Detector PCE-FD 20

₹684,316.00

Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic flaw detector with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based flaw detector uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

Operating frequency range: 1 … 10 MHz
Measured time interval range: 6 … 1000 microseconds (µs)
Sound velocity: 1000 … 9999 m/s

Thickness Meter PCE-FD 20

₹684,316.00

Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

Operating frequency range: 1 … 10 MHz
Measured time interval range: 6 … 1000 microseconds (µs)
Sound velocity: 1000 … 9999 m/s

Paint Testing Equipment PCE-CSM 20

₹785,649.00

Price excl. VAT &. delivery

The paint testing equipment is used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the paint testing equipment offers a long battery life, a 4-color lamp and an easy-to-use portable design. The paint testing equipment covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer

2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B