• wet and dry density, % compaction, % moisture
• measuring depth: 50 ... 300 mm
• measurement within 5 seconds
• internal data memory for 4200 values
• status bar for GPS signal, memory and battery
• 5-inch touch screen
• location determination via GPS
• software
• standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

• wet and dry density, % compaction, % moisture
• measuring depth: 50 ... 300 mm
• measurement within 5 seconds
• internal data memory for 4200 values
• status bar for GPS signal, memory and battery
• 5-inch touch screen
• location determination via GPS
• software
• standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

The HVAC meter has a 1.2 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this HVAC meter. The camera head of this HVAC meter can move freely in 4 directions.

• Cable / head diameter: 2 mm
• Direction of movement camera head: 4-way
• Camera head length: 7 mm
• Bending radius: 6 mm
• 1.2 m / 3.9 ft endoscope cable
• 5" monitor
• Image and video memory
• IP58 camera cable
• 400 x 400 pixel image resolution

The closing force transducer PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The closing force transducer is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

• Measuring range: 30,000 N / 3,000 kg / 3 t
• Resolution: 10N / 1kg
• Measurement uncertainty: ±0.5% full scale
• Position of the 4 sensors is adjustable
• Touch display including printer
• Optional: Measurement data storage on USB stick

The device clamp force gage PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gage is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

• Measuring range: 30,000 N / 3,000 kg / 3 t
• Resolution: 10N / 1kg
• Measurement uncertainty: ±0.5% full scale
• Position of the 4 sensors is adjustable
• Touch display including printer
• Optional: Measurement data storage on USB stick

The device clamp force gauge PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gauge is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

• Measuring range: 30,000 N / 3,000 kg / 3 t
• Resolution: 10N / 1kg
• Measurement uncertainty: ±0.5% full scale
• Position of the 4 sensors is adjustable
• Touch display including printer
• Optional: Measurement data storage on USB stick

The surface testing - inspection camera has a 1.2 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this surface testing - inspection camera. The camera head of this inspection camera can move freely in 4 directions.

• Cable / head diameter: 2 mm
• Direction of movement camera head: 4-way
• Camera head length: 7 mm
• Bending radius: 6 mm
• 1.2 m / 3.9 ft endoscope cable
• 5" monitor
• Image and video memory
• IP58 camera cable
• 400 x 400 pixel image resolution

The car measuring device has a 1.2 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this car measuring device. The camera head of this car measuring device can move freely in 4 directions.

• Cable / head diameter: 2 mm
• Direction of movement camera head: 4-way
• Camera head length: 7 mm
• Bending radius: 6 mm
• 1.2 m / 3.9 ft endoscope cable
• 5" monitor
• Image and video memory
• IP58 camera cable
• 400 x 400 pixel image resolution

• Cable / head diameter: 2 mm
• Direction of movement camera head: 4-way
• Camera head length: 7 mm
• Bending radius: 6 mm
• 1.2 m / 3.9 ft endoscope cable
• 5" monitor
• Image and video memory
• IP58 camera cable
• 400 x 400 pixel image resolution