The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.

• Measuring range: 10 Nm (1 kgf-m) / 7.38 ft-lb
• Max. 0,5 % accuracy from the measuring range
• Measuring rate freely adjustable up to 1000 Hz
• 24 Bit Processor
• Keyed chuck up to Ø 13 mm

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 50,000 kg / 500 kN / 110,231 lb
• Resolution: 20 kg / 200 N / 44 lb
• Minimum load: 400 kg / 881 lb
• Supplied with remote control indicator

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 20,000 kg / 200 kN / 44,092 lb
• Resolution: 10 kg / 100 N / 22 lb
• Minimum load: 200 kg / 440 lb
• Supplied with remote control indicator

Our motorized tension dynamometer test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized tension dynamometer test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized tension dynamometer test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 20,000 kg / 200 kN / 44,092 lb
• Resolution: 10 kg / 100 N / 22 lb
• Minimum load: 200 kg / 440 lb
• Supplied with remote control indicator
• incl. ISO Calibration Certificate

• measurement range: 0 ... 500 N
• resolution: 0.1 N
• accuracy: ±0.05 % FS
• sampling rate: 2 ... 100 Hz
• traverse speed: 100 mm/min, 300 mm/min
• traverse distance: 150 mm 
• Measurable edge thickness: 0.4...3.5 mm
• Measurable board thickness: 10...64 mm
• graphical display
• data logger

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 10,000 kg / 100 kN / 22,046 lb
• Resolution: 5 kg / 50 N / 11 lb
• Minimum load: 100 kg / 220 lb
• Supplied with remote control indicator

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges / tension dynamometers. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• incl. software
• incl. force gauge PCE-DFG N 5K (0 … 5000 N)
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 10,000 kg / 100 kN / 22,046 lb
• Resolution: 5 kg / 50 N / 11 lb
• Minimum load: 100 kg / 220 lb
• Supplied with remote control indicator
• incl. ISO Calibration Certificate