The contact thermometer is a highly accurate 1-channel temperature measuring device. The contact thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

• Measuring range: -100 … +400 °C / -148 … 752 °F
• Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 … 82.4 °F) device only
• Resolution: 0.01 °C / 0.018 °F
• PT-100 sensor

The contact thermometer with microprocessor is a high precision 1-channel temperature gauge. The contact thermometer with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

• 1 channel temperature recorder
• Automatic shutdown
• High accuracy of ± 2% r.H.
• Sampling rate of 2 / sec
• Memory size: 5,000 values
• Incl. ISO calibration certificate

The Contact Thermometer has two measuring inputs. Each measuring input from the Contact Thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the Contact Thermometer shows rapid temperature fluctuations.

• Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
• Resolution: 0.01 °C
• Two-channel temperature data logger
• For thermocouples type K, T and J
• Data storage for 20,000 measuring points

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 350 ... 800 nm
• PAR, PPFD, YPFD
• Blue-Purple Irradiance (Eb)

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 350 ... 800 nm
• PAR, PPFD, YPFD
• Blue-Purple Irradiance (Eb)

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 350 ... 800 nm
• PAR, PPFD, YPFD
• Blue-Purple Irradiance (Eb)

The humidity detector is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our humidity detector is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).

• Readability mass fraction of water: 0 … 100%
• Moisture measurement range: ± 0.1 … 100% (water mass fraction))
• Maximum permissible absolute error moisture measurement: Varies by material, lab test required
• Temperature range: +5 … +80 °C

The PCE-JR-911 Non-Contact Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Non-Contact Thermometer comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.

• Temperature range: -40 to 500°C / -40 … 932°F
• Resolution: 0.1°C / 0.18°F
• Accuracy: ±2% of reading or ±2°C / 3.6°F
• Optical resolution: 8:1
• Emissivity: 0.3 to 1.0 (adjustable)
• Interface: RS-232
• Display: LCD