The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range:±32 m/s
Resolution: 0.001 m/s
Pipe size: DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
The BTU Meter / Clamp on Heat meter has a measuring range of ±32 m/s. To perform flow measurement with the BTU Meter / Clamp on Heat meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
The Ultrasonic testing device has a measuring range of ±32 m/s. To perform flow measurement with the Ultrasonic testing device, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
Interface: USB
Data logger: 32 GB memory capacity (10 million measuring points)
The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The Material Tester is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Material Tester displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.
The Test Stand is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Test Stand displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.
The Torque Meter is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Torque Meter displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
Interface: USB
Data logger: 32 GB memory capacity (10 million measuring points)
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range:±32 m/s
Resolution: 0.001 m/s
Pipe size: DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
The Ultrasonic testing device has a measuring range of ±32 m/s. To perform flow measurement with the Ultrasonic testing device, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
Interface: USB
Data logger: 32 GB memory capacity (10 million measuring points)
The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The Ultrasonic testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this Ultrasonic testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative Ultrasonic testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The illuminometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The illuminometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
The BTU Meter / Clamp on Heat meterhas a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
The Universal Testing Machine is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Universal Testing Machine displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.
The state-of-the-art Aerosol particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the Aerosol particle counter is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art Cleanroom Dust Meter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the Cleanroom Dust Meter is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art Measuring device for cleanrooms enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the Measuring device for cleanrooms is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The environmental meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
The lux meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The lux meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
The Concrete tester / concrete measuring device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
The environmental tester is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental tester guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the airborne particle-counting hygiene is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
