The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

• Output signal: 4 … 20-mA  
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0.5 m/s … 50 m/s (1.1 … 111.8 mph)

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

• Output signal: 0 … 10V
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0.5 m/s … 50 m/s (1.1 … 111.8 mph)

The Flow Meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.

• Output signal: 4 … 20-mA
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0 … 360°

The Flow Meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.

• Output signal: 0 … 10V DC
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0 … 360°

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.

• Output signal: 4 … 20-mA
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0.5 m/s … 50 m/s (1.1 … 111.8 mph)

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.

• Output signal: 0 … 10V
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0.5 m/s … 50 m/s (1.1 … 111.8 mph)

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

The Flow Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Flow Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The PCE-VA 20-SET is a multi-functional air flow meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• Incl. ISO Calibration Certificate

The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±  (3% of measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1
• Incl. ISO Calibration Certificate

PCE-VA 20-SET is a multifunction air flow meter with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the air flow device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3" Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

The PCE-HVAC 2 is a Flow Meter that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile Flow Meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter
• Includes ISO calibration certificate

PCE-HVAC 2 is an environmental meter with a pitot tube. This portable environmental meter can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter

PCE-HVAC 2 is an environmental tester with a pitot tube. This portable environmental tester can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter

PCE-HVAC 2 is a high-velocity flow meter with a pitot tube. This portable flow meter can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter

PCE-VA 20 is a multifunction air flow meter for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1

PCE-HVAC 2 is a high-velocity multifunction air flow meter with a pitot tube. This portable air flow meter can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter