The device clamp force gauge PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gauge is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

• Measuring range: 30,000 N / 3,000 kg / 3 t
• Resolution: 10N / 1kg
• Measurement uncertainty: ±0.5% full scale
• Position of the 4 sensors is adjustable
• Touch display including printer
• Optional: Measurement data storage on USB stick

• measurement range: 0 ... 20 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz
• incl. ISO-Calibration Certificate

• measurement range: 0 ... 50 kN
• resolution: 5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz
• incl. ISO-Calibration Certificate

• measurement range: 0 ... 20 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 50 kN
• resolution: 5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 10 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz
• incl. ISO-Calibration Certificate

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• incl. software
• incl. force gauge PCE-DFG N 5K (0 … 5000 N)
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

• measurement range: 0 ... 10 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 1000 N
• resolution: 0.5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz
• incl. ISO-Calibration Certificate

• measurement range: 0 ... 2000 N
• resolution: 0.5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz
• incl. ISO-Calibration Certificate

• measurement range: 0 ... 5000 N
• resolution: 1 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz
• incl. ISO-Calibration Certificate

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

• Measures the oscillation frequency of the belt
• Measuring range: 10 … 900 Hz
• Accuracy: ± (1% of rdg. + 4 digits)
• Resolution: <100 Hz: 0.1 Hz                       >100 Hz: 1 Hz
• Memory for 750 measured values
• Length of gooseneck sensor 16 cm
• incl. ISO Calibration Certificate

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

• Measures the oscillation frequency of the belt
• Measuring range: 10 … 900 Hz
• Accuracy: ± (1% of rdg. + 4 digits)
• Resolution: <100 Hz: 0.1 Hz                       >100 Hz: 1 Hz
• Memory for 750 measured values
• Length of gooseneck sensor 25 cm / 9,8 in
• incl. ISO Calibration Certificate

• measurement range: 0 ... 1000 N
• resolution: 0.5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 2000 N
• resolution: 0.5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 5000 N
• resolution: 1 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 500 N
• resolution: 0.5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz
• incl. ISO-Calibration Certificate

• measurement range: 0 ... 500 N
• resolution: 0.5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• Measurement of the vibration frequency of the belt
• Measuring range: 10 ... 680 Hz
• Accuracy: ± 1 Hz (< 100 Hz) / ± 1 % (≥ 100 Hz)
• Length of gooseneck sensor 115 mm
• Max. belt width: 999.9 mm
• Max. belt mass: 999.9 g/m
• Acoustic measurement
• incl. ISO-Calibration Certificate

• Measurement of the vibration frequency of the belt
• Measuring range: 10 ... 680 Hz
• Accuracy: ± 1 Hz (< 100 Hz) / ± 1 % (≥ 100 Hz)
• Length of gooseneck sensor 115 mm
• Max. belt width: 999.9 mm
• Max. belt mass: 999.9 g/m
• Acoustic measurement

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

• Measures the oscillation frequency of the belt
• Measuring range: 10 … 900 Hz
• Accuracy: ± (1% of rdg. + 4 digits)
• Resolution: <100 Hz: 0.1 Hz                       >100 Hz: 1 Hz
• Memory for 750 measured values
• Length of gooseneck sensor 25 cm / 9,8 in

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

• Measures the oscillation frequency of the belt
• Measuring range: 10 … 900 Hz
• Accuracy: ± (1% of rdg. + 4 digits)
• Resolution: <100 Hz: 0.1 Hz                       >100 Hz: 1 Hz
• Memory for 750 measured values
• Length of gooseneck sensor 16 cm

• electronically controlled hydraulic pump
• various measuring head sizes available
• adjustable pulling speed, limit and holding time
• graphical measurement history
• memory in csv file format
• incl. 20 mm measuring heads
• standard(s): GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1

The PCE-DDM 50 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 50,000 kg / 500 kN / 110,231 lbs
• Resolution: 20 kg / 200 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied with remote control indicator

The PCE-DDM 50WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 50,000 kg / 500 kN / 110,231 lbs
• Resolution: 20 kg / 200 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied without remote control indicator

• Measuring range: 4 ... 200 cN
• Resolution: 1 cN
• Accuracy: ±2.5% FS
• Units: cN, oz, kgf, N, lb
• Memory: 41 data sets
• Measurement modes: Peak, Real-Time, Hold
• Sensor head width: 65 mm
• PC software
• Measurement on wires, fibers, or textiles

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 20,000 kg / 200 kN / 44,092 lb
• Resolution: 10 kg / 100 N / 22 lb
• Minimum load: 200 kg / 440 lb
• Supplied with remote control indicator
• incl. ISO Calibration Certificate

• Measuring range: 0 ... 100 kN
• Resolution: 10 N
• Accuracy: ±0.05 % F.S.
• 32 GB memory for 30 million measuring points
• USB-C interface
• Graphic display
• Measuring rate: 1 ... 7200 Hz
• incl. ISO-Calibration Certificate

• Measuring range: 0 ... 10 kN
• Resolution: 2 N
• Accuracy: ±0.05 % F.S.
• 32 GB memory for 30 million measuring points
• USB-C interface
• Graphic display
• Measurement rate: 1 .... 7,200 Hz
• incl. ISO-Calibration Certificate

• Measuring range: 0 ... 20 kN
• Resolution: 2 N
• Accuracy: ±0.05 % F.S.
• 32 GB memory for 30 million measuring points
• USB-C interface
• Graphic display
• Measuring rate: 1 ... 7200 Hz
• incl. ISO-Calibration Certificate

• manually controlled hydraulic pump
• various measuring head sizes available
• memory in CSV file format
• incl. 20 mm measuring heads
• standard(s): GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 20,000 kg / 200 kN / 44,092 lb
• Resolution: 10 kg / 100 N / 22 lb
• Minimum load: 200 kg / 440 lb
• Supplied without remote control indicator
• incl. ISO Calibration Certificate

• Measuring range: 0 ... 50 kN
• Resolution: 5 N
• Accuracy: ±0.05 % F.S.
• 32 GB memory for 30 million measuring points
• USB-C interface
• Graphic display
• Measuring rate: 1 ... 7200 Hz
• incl. ISO-Calibration Certificate

The PCE-DDM 20 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 20,000 kg / 200 kN / 44,092 lbs
• Resolution: 10 kg / 100 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied with remote control indicator