Zum Hauptinhalt springen
Industrial Scales PCE-SD 33C
₹134,625.00
Price excl. VAT &. delivery
The industrial scales PCE-SD 33C are low-costrobustverifiablesystembalances.Thecalibration of theindustrial scales is according to thetradingclassM III. The sturdyfoundationof theindustrial scalesis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 30 kg
  • Readability:10g
  • Platform size: 500 x600mm
  • Calibration value:10 g
  • Certifiable:M III
Re-Calibration Certificate CAL-PCE-PQC
₹106,779.00
Price excl. VAT &. delivery
Re-calibration certificate for a particle counter, certifies the accuracy and is often required to meet NIST traceability requirements.

  • Re-calibration certificate for max. 6 channels traceable to NIST

    N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.

DAkkS Calibration (ISO 17025) CAL-DAKKS-AM for Anemometers
₹78,933.00
Price excl. VAT &. delivery
DAkkS calibration, e.g., to ensure compliance with DIN ISO 17025. For this purpose, we send the scale to our in-house calibration laboratory. You, as the client, along with the measurement values and the serial number, are recorded in this DAkkS calibration report.

- 5 measurement points: 1, 5, 10, 15, 20 m/s

Calibration certificates are issued specifically for the customer and are excluded from the right of return.
Laboratory pH electrode PCE-PH-LAB-ME3 Biotechnology
₹77,709.00
Price excl. VAT &. delivery
The laboratory pH electrode is a high-precision solution for the analysis of semi-microscopic and small-volume samples.

  • Laboratory pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: Top: 12 mm, Bottom: 3 mm
  • Temperature range: 0 ... 100 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: Biotechnology, beverage analysis, food industry, agriculture
ISO Calibration Certificate CAL-T SIM12 for thermocouple thermometers
₹76,332.00
Price excl. VAT &. delivery
ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this purpose, we hand over the measuring device to our in-house calibration laboratory. You as the customer, the measured values and the serial number are recorded in this ISO calibration certificate.

  • 10 points per channel between -100 … +1250°C
  • 12 channels
    Calibration certificates are issued especially for the customer and are excluded from the right of return.
ISO calibration certificate for torque meters (2 directions)
₹74,955.00
Price excl. VAT &. delivery

ISO calibration certificate for torque meters, certifies the accuracy and is often required to comply with DIN ISO 9000. The test is carried out in both directions (left and right rotation).

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Calibration Certificate CAL-PCE-PA
₹73,578.00
Price excl. VAT &. delivery

ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this we give the measuring device to our in-house calibration laboratory. You as the client, the measured values and the serial number are recorded in this ISO calibration certificate.

N.B. calibration certificates are issued specifically for the customer and are non-returnable.

Special laboratory pH electrode PCE-PH-LE Tris buffer, test tubes
₹71,895.00
Price excl. VAT &. delivery
Laboratory pH electrode, suitable for measuring liquids with Tris buffer

  • Laboratory pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: 6 mm
  • Temperature range: 0 ... 50 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: Tris buffer, test tubes
High Temperature Sensor TF-514 K-Type
₹70,365.00
Price excl. VAT &. delivery

Temperature sensor for foundry applications

  • Tmax.: 1260 °C / 2300 °F
  • Accuracy: ±1.5 °C
  • 2 fixed measuring tips
  • Measuring hot metal surfaces, fresh castings
  • Sensor length 500 mm / 19.6"
  • Length of measuring tip 50 mm / 1.9"
  • Type K thermocouple

 

ISO Calibration Certificate for PCE-VM xx
₹69,753.00
Price excl. VAT &. delivery

ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this we give the measuring device to our in-house calibration laboratory. You as the client, the measured values and the serial number are recorded in this ISO calibration certificate.

1 point: 159.2 Hz; 10mm/s; 14.1 m/s²; 0.028mm; 1 - 4 channels

N.B. calibration certificates are issued specifically for the customer and are non-returnable.

Calibration certificate CAL-CSM
₹68,070.00
Price excl. VAT &. delivery
ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this purpose, we hand over the measuring device to our in-house calibration laboratory. You as the customer, the measured values and the serial number are recorded in this ISO calibration certificate.

- Factory calibration (ISO 9001)
- 12 measuring Points
- CIE-Lab or CIE-LCH
- type A, C, D65 or D50
- viewing angle 2° or 10°
- measuring geometry 8°:di or 0°:45°a

Calibration certificates are issued specifically for the customer and are excluded from the right of return.
ISO Calibration Certificate CAL-V-III
₹62,256.00
Price excl. VAT &. delivery

CAL-V-III is an ISO calibration certificate.

  • Includes device testing and calibration performed by a laboratory
  • Certificate lists all measured values, confirming the device meets the applicable ISO standard(s)
  • Each ISO calibration certificate is personalized for the customer; therefore, ISO calibration certificates are exempt from the right of return

Special pH electrode PCE-PH-LAB-LC Measurement of low-ion media
₹61,185.00
Price excl. VAT &. delivery
The pH electrode for aqueous media with low conductivity has been specially developed to enable precise and reliable measurements in demanding samples with low conductivity.

  • Special pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: 12 mm
  • Temperature range: 0 ... 60 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: pH measurement in low-ion media
ISO calibration certificate for torque meters (1 direction)
₹60,573.00
Price excl. VAT &. delivery

ISO calibration certificate for torque meters, certifies the accuracy and is often required to comply with DIN ISO 9000. The test is carried out in one direction only (left or right rotation can be freely selected)

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

pH Electrode for Wine PCE-PH-WINE
₹58,278.00
Price excl. VAT &. delivery
pH electrode especially for wine, beer and other liquids with low conductivity

  • Laboratory pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: 12 mm
  • Temperature range: 0 ... 80 °C 7 32 ... 176 °F
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Shaft / sensor material: Glass
  • Application: especially wine, beer
ISO Calibration Certificate CAL-PCE-TDS-ISO
₹57,360.00
Price excl. VAT &. delivery

ISO calibration certificate for the flow meter, certifies traceability to test standards and is required to comply with ISO 9000 requirements.

  • 2 different pipe diameters, each 1x speed

    The calibration certificate is issued especially for the customer and therefore is exempt from the right of return.

Screw-in Sensor TF-119 K-Type
₹53,397.00
Price excl. VAT &. delivery

Screw-in sensor with T-handle for solid or frozen materials with 1m cable (removable)

  • Tmax: 200 °C / 392 °F
  • Accuracy: ± 1.5 °C
  • Diameter: Ø 6.0 mm
  • Length: 130 mm
  • Thermocouple Type K

 

Semi-micro pH electrode PCE-PH-SME
₹53,229.00
Price excl. VAT &. delivery
Semi-micro pH electrode, suitable for measurement in a small container

  • pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: 6 mm
  • Temperature range: 0 ... 80 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application:
    Laboratory flasks, test tubes
Calibration certificate CAL-HT-2
₹45,885.00
Price excl. VAT &. delivery
Calibration certificate for our hardness testers. This is often required to comply with DIN ISO 9000.

ISO calibration certificate for hardness testers with rebound hardness test according to Leeb / 3 measuring points (about 490 HLD, 660 HLD, 780 HLD)


N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.
Calibration certificate CAL-PCE-UCI
₹45,885.00
Price excl. VAT &. delivery
We offer a calibration certificate that meets DIN ISO 9000. This is done by an independent laboratory. It can be ordered with the unit or when an annual calibration is required.

The calibration certificate is issued especially for the customer and therefore is exempt from the right of return.
CAL-PCE-AS 1 ISO certificate for air sampler
₹42,060.00
Price excl. VAT &. delivery
  • Calibration certificate forair samplerfor keepingyourDINISO9000 for Europe and ISO 17025 for North America.Calibration value: Flow rate at measuring headMeasurement points:5distributingover the cross section,ata constant volume flow*Calibration certificates are issuedespecially for the customerandarenot returnable**
ISO Calibration Certificate for Thermal Camera
₹42,060.00
Price excl. VAT &. delivery

  • To comply with your DIN ISO 9000 quality management system.
  • Calibration check on certified black bodies.
  • Checked over the measuring range of the thermal imager, but without indication of the measuring points in the certificate.

High-temperature pH electrode PCE-PH-LAB-HTE for waste water, sludge
₹41,754.00
Price excl. VAT &. delivery
The laboratory pH electrode offers precise and reliable measurements in a wide range of applications. With its robust design and high-quality workmanship, it is ideal for laboratory environments.

  • Standard pH electrode
  • Measuring range: 0 ... 14 pH
  • Diameter: 9 mm
  • Temperature range: 0 ... 130 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: Waste water, sludge
Laboratory pH electrode PCE-PH-LAB-GEN Laboratory application
₹38,847.00
Price excl. VAT &. delivery
The pH electrode for general laboratory applications is a reliable choice for precise pH measurements in aqueous media.

  • pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: 12 mm
  • Temperature range: -5 ... 100 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: General laboratory applications
ISO Calibration Certificate CAL-PCE-RT
₹38,694.00
Price excl. VAT &. delivery
  • CAL-PCE-RT includes calibration of the instrument in accordance with applicable ISO standard(s), along with documentation containing all readings taken.*US calibration certificate is ISO 17025** Each calibration certificate is issued especially for the customer and instrument, and therefore is exempt from the right of return.

ISO Calibration Certificate
₹38,235.00
Price excl. VAT &. delivery

an ISO calibration certificate for hardness testers.

  • Certificate lists all measured values, confirming the device meets the applicable ISO standard(s)
  • Each ISO calibration certificate is personalized for the customer; therefore, ISO calibration certificates are exempt from the right of return
  • Based on DIN EN 12504-2:2021

 

ISO Calibration Certificate CAL-V-I for Vibration Meter
₹38,235.00
Price excl. VAT &. delivery

ISO calibration certificate for vibration measuring devices, for example of the PCE-VT series, PCE-VM series or PCE-MSR series, e.g. to comply with your DIN ISO 9000

1 point calibration for vibration measuring devices at: 159.2 Hz; 10 mm/s; 14.1 m/s²; 0.028 mm

N.B. calibration certificates are issued specifically for the customer and are excluded from the right of return.

ISO Calibration Certificate CAL-PM (to 20 bar)
₹37,470.00
Price excl. VAT &. delivery

Certificate, e.g. for compliance with your DIN ISO 9000. For this purpose, we send the pressure gauge to an independent calibration laboratory. The measured values, the serial number and you as the client are recorded on this ISO certificate.

  • 10 measuring points evenly distributed over the measuring range
  • (up / down / max. 20 bar)
  • for the sensors:   PS-100-5 (5 bar)   PS-100-20 (20 bar)N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.

ISO Re-calibration Certificate CAL-COM
₹35,940.00
Price excl. VAT &. delivery
ISO re-calibration certificate for material testing equipment is often required to comply with your DIN ISO 9000.

5 calibration points in the range between 1 … 100% 
IACS at 60 kHz test frequency

Calibration certificates are issued specifically for the customer and are excluded from the right of return.
Temperature Sensor for Viscometer PCE-RVI 2
₹34,410.00
Price excl. VAT &. delivery

Temperature sensor for Krebs viscometers PCE-RVI 2

  • Temperature sensor: Resistance
  • Temperature measurement measuring range: 0 … 100°C / 32 … 212°F
  • Temperature measurement accuracy: 0.1°C / 0.18°F

Temperature Sensor for Viscometer PCE-RVI 8
₹34,410.00
Price excl. VAT &. delivery

Temperature sensor for Krebs viscometers PCE-RVI 8

  • Temperature sensor: Resistance
  • Temperature measurement measuring range: 0 … 100°C / 32 … 212°F
  • Temperature measurement accuracy: 0.1°C / 0.18°F

ISO Calibration Certificate for Electromagnetic Meter CAL-PCE-MFM
₹34,104.00
Price excl. VAT &. delivery

ISO calibration certificate for magnetic field tester, is often prescribed in companies to comply with DIN ISO 9000.

2 calibration points: 0 +/- 1% 1847 mT +/- 4%

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Gas Testing Station Gas-Pro-Q test
₹32,727.00
Price excl. VAT &. delivery
The Gas testing station Gas-Pro-Q test is a mobile, mechanical testing station for the rapid performance of function tests (bump tests) and calibrations on Gas-Pro multi-gas detectors. The Gas testing station Gas-Pro-Q test offers:

  • Rapid test in under 15 seconds
  • Reduced gas consumption
  • No regulator valve (cylinder control)
  • Click-in securing of the Gas-Pro device
  • Fixing points for bench or wall mounting
Calibration Certificate for Insulation Tester PCE-IT series
₹32,115.00
Price excl. VAT &. delivery
ISO calibration certificate for one of the insulation measuring instruments, is often required to comply with DIN ISO 9000.  

Calibration certificates are issued specifically for the customer and are excluded from the right of return.
Food pH-electrode CPC-OSH-12-01
₹31,962.00
Price excl. VAT &. delivery
Replacement pH-electrode with a robust hand grip, for food like cheese, mead, cold mead etc.

  • Range: 0 … 14 pH
  • Material: glass with stainless steel blade
  • Temperature range: 0 … 60 °C
  • Connector: BNC
  • Cable: 1 m
Factory calibration certificate (ISO 9001) for process calibrator (PCE-123)
₹26,301.00
Price excl. VAT &. delivery
Factory calibration certificate (ISO 9001) for process calibrator (PCE-123), e.g. for compliance with your DIN ISO 9000.
Factory calibration certificate (ISO 9001) for process calibrator (PCE-123)

  • For process calibrator PCE-123
  • 30 measuring points
  • 0 mA … 24 mA
  • 0 V … 10 V
  • Thermocouple -200 … 1370°C (Type K)
  • Frequency test 0.001 Hz … 62.5 kHz