PCE-EM 30 is a digital portable 3-axis environmental electromagnetic radiation tester or EMF detector used to measure electromagnetic radiation generated by electronic devices and electric installations. This triple-axis EMF meter provides greater precision than single-axis models as well as affords the ability to assess EMFs from more than one source at a time.

• Measuring range: 0 to 199.99 V/m, 0 to 99.999 W/m², 0 to 9.9999 mW/cm²
• EMF bandwidth: 100 kHz to 3 GHz
• Measures EMF of 5G cellular Low-band and Mid-band
• Comes with two external sensor probes (for low and high frequency ranges)

The environmental tester PCE-428-EKIT, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is a class 2 device and is equipped with an octave band frequency filter. Optionally, the environmental tester PCE-428-EKIT can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with a SPL meter over a long period of time, even in the rain.

• Accuracy class 2
• A, B, C & Z frequency rating
• Fast, Slow, Pulse and Peak time weighting
• Statistics function
• 1/1 octave band included
• 1/3 octave band optional
• incl. outdoor noise level meter kit PCE-4xx-EKIT
• Outdoor measurement of sound and noise

The environmental tester PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is equipped with an octave band frequency filter. Optionally, the environmental tester can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with an environmental meter over a long period of time, even in the rain.

• Accuracy class 2
• A, B, C & Z frequency rating
• Fast, Slow, Pulse and Peak time weighting
• Statistics function
• 1/1 octave band included
• 1/3 octave band optional
• incl. outdoor noise level meter kit PCE-4xx-EKIT
• Outdoor measurement of sound and noise
• incl. ISO calibration certificate

The class 1 data-logging environmental tester meets all requirements for noise measurement and frequency analysis. This integrating precision pulse environmental tester complies with all applicable standards and guidelines.

• Accuracy class 1
• A, B, C & Z frequency weighting
• Fast, Slow, Impulse and Peak time weighting
• Statistics function
• 1/1 octave band included
• 1/3 octave band optional

The environmental tester is a measuring device for stationary measurement of relative humidity and temperature. This environmental tester consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

• Temperature measuring range: 0 … +60 °C (Celsius only)
• Humidity measuring range: 10 … 95 % RH
• Up to 50 m (164 ft) reading distance
• External sensor (wired)
• Voltage supply: 230 V AC
• with analogue output 4 … 20 mA

The environmental tester is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This environmental tester consists of an LED display (100 mm high) and is protected according to IP 54.

• Temperature measuring range: 0 … +60 °C (Celsius only)
• Humidity measuring range: 10 … 95 % RH
• Up to 50 m (164 ft) reading distance
• External sensor (wired)

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 110 ... 230 V AC , 50 / 60 Hz
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 24 V DC
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

• UV irradiance: 0 ... 40000 mW/cm²
• Resolution: 1 mW/cm²
• Accuracy: <50mW/cm²: ±5 mW/cm², >50 mW/cm²: ± 10% v.Mw.
• UV energy: 0 ... 999999 mJ/cm²
• Temperature measuring range: -55 ... 125°C / -67 ... 257°F
• Resolution: 0.1°C / 1.8°F
• Standards: JJG 879-2015, QB/T 2826-2017
• Spectral range: 340 ... 420 nm (UVA)
• Use e.g. in UV curing, UV light sources

• Measuring range: 21 ... 143 dBA
• Resolution: 0.1 dB
• Class 1 accuracy IEC61672-1:2013
• Frequency range: 10 Hz ... 20 kHz
• Frequency weighting: A, C, Z
• Time weighting: S, F, I
• Ethernet, WiFi, USB Type-C
• Internal memory: 8 GB
• External SD card support: 32 GB / 64 GB
• Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
• 4-inch TFT touch display
• PC software

• Measuring range: 21 ... 143 dBA
• Resolution: 0.1 dB
• Class 1 accuracy IEC61672-1:2013
• Frequency range: 10 Hz ... 20 kHz
• Frequency weighting: A, C, Z
• Time weighting: S, F, I
• Ethernet, WiFi, USB Type-C
• Internal memory: 8 GB
• External SD card support: 32 GB / 64 GB
• Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
• 4-inch TFT touch display
• PC software
• incl. ISO-Calibration Certificate

Environmental Tester PCE-170 A to 40,000 lux, internal sensor, automatic zero adjustment. The environmental tester has a large measurement range, short response time and a compact housing allowing for quick, effortless one-hand operation.

• Measurement range: 0.00 to 40,000 lux
• Resolution: 0.01 lux in the range 39.99 Lux
• Large 5-digit LCD display
• Sensor: silicon photodiode
• Incl. ISO Calibration Certificate

PCE-G28 is a portable, handheld environmental electromagnetic field radiation tester or gauss meter that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).

• Measurement range: 0 … 20000 mG / 0 … 2000 µT
• Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
• Resolution: 0.1 mG / 0.01 µT

An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. Such electrostatic charges can be detected with the environmental tester.

• Measuring range: ±60 kV DC
• Acoustic signal when the measured value is exceeded
• Temperature and humidity display
• Laser for aligning the measuring device

• Temperature measuring range: 0 … +60 °C (Celsius only)
• Humidity measuring range: 10 … 95 % RH
• Up to 50 m (164 ft) reading distance
• External sensor (wired)
• Voltage supply: 230 V AC
• with analogue output 4 … 20 mA
• incl. ISO calibration certificate

• Measuring range: 0 ... 200 µS/cm
• Resolution: 0.001 µS/cm
• Accuracy: ≤ ±1%
• Temperature measurement: 0 ... 60 °C / 32 ... 140 °F
• Integrated temperature compensation
• 3-inch color display
• 2 x 4 ... 20 mA analogue outputs
• 3 relay outputs (SPDT)
• RS485 (Modbus RTU)
• Memory for measurement and calibration data
• Conductivity electrode with 3/4-inch NPT thread

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• praphic display of measurement progress
• data logger
• application: measurements in low-ion media

The environmental tester is a class 2 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy environmental tester has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The sound level tester calculates the equivalent continuous sound level Leq (LXeq).

• Measuring range: 25 … 136 db(A)
• LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
• Frequency weighting: A, B, C and Z
• Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
• adjustable data-recording interval from 1 s … 24 h
• 1/1 octave band filter (optional 1/3 octave band filter upgrade)

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• electrode application range: -5 ... +100 °C
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• praphic display of measurement progress
• data logger
• application: chemical, pharmaceutical and food industry

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• electrode's range of use: 0 ... 130 °C
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• praphic display of measurement progress
• data logger
• media: aggressive fluids
• application: agriculture, wastewater, sludge

The Environmental Tester stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Environmental Tester provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products

The environmental tester is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental tester determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The environmental tester kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental tester PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental tester PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems