1. You are here:
  2. Home
  3. Control Systems

Control Systems

You will find a wide range of control systems to be used for many different applications from simple displays with different sizes up to complete regulators. Nowadays, control systems are essential instruments in modern production processes. The compact displays of these control systems enable quick and easy view of diverse physical magnitudes, such as temperature, pressure, revolutions and standard process signals which can be found in any automated process. Besides, modern regulators can solve quickly and effectively different control works.
Electric Vehicle EV Tester / EV Test Instrument
I/O Module
Indicator
Panel Meter
Regulator / Process Controller
Remote Maintenance Module
Sensor
Signal Converter
Transducer
Temperature Signal Converter PCE-SCI-U
160,90 €
Price excl. VAT &. delivery
2 year Warranty
The temperature signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the temperature signal converter are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Details
Thermo Transducer PCE-SCI-U
160,90 €
Price excl. VAT &. delivery
2 year Warranty
The thermo transducer converts an analog input signal into a corresponding analog output signal. The input and output signals from the thermo transducer are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Details
Universal Signal Converter PCE-SCI-U
160,90 €
Price excl. VAT &. delivery
2 year Warranty
The universal signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the universal signal converter are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Details
Voltage Signal Converter PCE-SCI-U
160,90 €
Price excl. VAT &. delivery
2 year Warranty
The voltage signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the voltage signal converter are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Details
Voltage Signal Converter PCE-SCI-U
160,90 €
Price excl. VAT &. delivery
2 year Warranty
The voltage signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the voltage signal converter are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Details
DIN-Rail Measuring Instrument PCE-SM3
161,05 €
Price excl. VAT &. delivery
2 year Warranty

The PCE-SM3 DIN rail measuring instrument is suitable for making binary signals or pulse signals bus-capable. It is thus possible, for example, to convert signals from flow sensors, rotary encoders, etc. to RS485 Modbus.

 

- Input channels: 2
- Inputs: pulse input / binary input
- Interface: RS485 Modbus (ASCII RTU)
- Power supply: 85 ... 253 V / 20 ... 50 V AC/DC (selectable)

Details
Panel Indicator PCE-DPD-Px Series
171,55 €
Price excl. VAT &. delivery
2 year Warranty
This multifunction digital panel indicator is a pulse counter, tachometer and and periodometer, for all types of pulse signals, and for all types of applications in the industry. The digital panel indicator has pulse type input signals, and the most common types in the industry are NPN, PNP, Namur, push-pull, inductive, potential-free, quadrature, ...

- Digital panel indicator with function of pulse counter, tachometer and periodimeter
- LED display 6 digits red 14 mm
- Signal ranges: counter up to 250 KHz, tachometer up to 500 KHz, periodimeter up to 500 KHz
- Functions: Push-pull inputs, NPN, PNP, Namur, pick-up, TTL, inductive, mechanical contact, quadrature signals (encoder)
Details
Panel Indicator PCE-DPD-U
172,90 €
Price excl. VAT &. delivery
2 year Warranty
The installation display can be configured as AC and DC voltmeters (up to 600 Vac / DC), AC and DC ammeters (up to 5 AAC / DC). Furthermore, the built-in display shows measured values of process signals (mA, VDC), thermocouples, resistive temperature sensors (Pt, Ni, PTC and NTC), resistors, potentiometers and frequency.

Input:
2-, 3- wire
Thermocouples
Potentiometer
Resistance
Process signals
Frequency
DC voltage
DC power
AC voltage
AC power
Details
Panel Meter PCE-DPD-U
172,90 €
Price excl. VAT &. delivery
2 year Warranty
The panel meter can be configured as AC and DC voltmeters (up to 600 Vac / DC), AC and DC ammeters (up to 5 AAC / DC). Furthermore, the built-in display shows measured values of process signals (mA, VDC), thermocouples, resistive temperature sensors (Pt, Ni, PTC and NTC), resistors, potentiometers and frequency.

Input:
2-, 3- wire
Thermocouples
Potentiometer
Resistance
Process signals
Frequency
DC voltage
DC power
AC voltage
AC power
Details
Panel Meter PCE-N30O-4
175,00 €
Price excl. VAT &. delivery
2 year Warranty
Two counters / tri-color digital display / 2 alarm relays / freely scalable / 2  control inputs / optional analog output and RS-485 /  front 65 IP.

- 2 internal counters
- Front IP 65
- 3 colour indication display
- 2 alarm outputs

Details
Humidity Sensor PCE-P18D
176,22 €
Price excl. VAT &. delivery
2 year Warranty

The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the humidity sensor . Air humidity and temperature are accurately determined in this compact humidity sensor via a semiconductor component. For commissioning, the humidity probe is supplied with a DC voltage. The measured values are output via a two-wire cable.


- With display
- Standard signal output
- Simple wall mounting
- RS-485 interface

 

Details
Panel Indicator PCE-DPD-Cx Series
176,22 €
Price excl. VAT &. delivery
2 year Warranty
This digital panel indicator with stopwatch with start, stop and reset input functions. The digital panel indicator has a size of 96 x 48 mm and displays the values ​​on a 6-digit red LED display of 14 mm. It has different reading formats available in both decimal and sexagesimal format, with a configurable preset value and different counting functions.

- Digital panel indicator with stopwatch function
- LED display 6 digits red 14 mm color
- Decimal or sexagesimal reading format
- Functions: Start / Stop / Reset inputs, On power-up, Trigger sense, ...
Details
Temperature Sensor PCE-P18D
176,22 €
Price excl. VAT &. delivery
2 year Warranty

The temperature sensor is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the temperature sensor. Air humidity and temperature are accurately determined in this compact temperature sensor via a semiconductor component. For commissioning, the temperature sensor is supplied with a DC voltage. The measured values are output via a two-wire cable.


- With display
- Standard signal output
- Simple wall mounting
- RS-485 interface

 

Details
Transmitter PCE-P20H Direct Current
176,22 €
Price excl. VAT &. delivery
2 year Warranty
The PCE-P20H transducer measures DC currents up to ± 5 A DC and converts them into a standard signal. Depending on the version, the PCE-P20H transducer can measure 1 A or 5 A DC and outputs a 4 ... 20 mA or 0 ... 10 V standard signal. Depending on the model, the supply voltage of the transducers is either 85 ... 253 V AC / DC or 20 ... 40 V AC / DC.

 

- Measurement and conversion of DC currents up to ± 5 A
- Output: 4 ... 20 mA or 0 ... 10 V Standard signal
- Various supply voltages
- Compact DIN rail mounting

Details
Transmitter PCE-P20H Direct Voltage
176,22 €
Price excl. VAT &. delivery
2 year Warranty
The PCE-P20H transducer measures voltage up to 400 V DC and converts them into a standard signal. Depending on the version, the PCE-P20H transducer can measure voltages up to 100 V DC, 250 V DC or 400 V DC and outputs a 4 ... 20 mA or 0 ... 10 V standard signal. Depending on the model, the supply voltage of the transducers is either 85 ... 253 V AC / DC or 20 ... 40 V AC / DC.

 

- Measurement and conversion of DC voltages up to 400 V
- Output: 4 ... 20 mA or 0 ... 10 V Standard signal
- Various supply voltages
- Compact DIN rail mounting

Details
Interface Converter PCE-RS232-TTL
179,90 €
Price excl. VAT &. delivery
2 year Warranty
The RS232 TTL interface converter is a device-independent solution for converting an RS232 signal into a TTL signal. The RS232 TTL interface converter can also be used to convert a TTL signal into an RS 232 signal.

- For parallel and crossed connections
- Transmission speed up to 115,200 baud
- 3.5 mm jack and SUB D 9 interface
Details
Panel Meter PCE-ND10
179,90 €
Price excl. VAT &. delivery
2 year Warranty
The panel meter is able to perform current, voltage and power measurements in 3-phase systems. By using appropriate transducers, it is also possible to measure high currents and voltages with the panel meter. Thepanel meter was designed for panel-mounting in 92 x 92 mm panel cut-outs.

- Power meter for panel-mounting (92 x 92 mm)
- Measurement of U, I, f, P, Q, S, PF...
- Power supply via voltage input
- Alarm function
** Different variants can be selected! Note: This item must be configured before ordering! **

Details
DIN-Rail Measuring Instrument PCE-SM1
186,72 €
Price excl. VAT &. delivery
2 year Warranty

The DIN-Rail Measuring Instrument PCE-SM1 is suitable for making analog signals bus-capable. Various analog signals such as 0 ... 20 mA, 0 ... 10 V, PT100 etc. are converted from the analog input module to RS485 Modbus.

 

- Input channels: 2
- Inputs: PT100, 0/4 ... 20 mA, 0 ... 10 V, 0 ... 40 Ω
- Interface: RS485 Modbus (ASCII RTU)
- Power supply: 85 ... 253 V / 20 ... 50 V AC / DC (selectable)

Details