Panel Meter

209,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The panel meter measures all relevant network parameters such as current, voltage, power and frequency. The panel meter is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.

Measures up to 63 A directly

Measuring about 1A / 5A transducer possible

Measurement of U, I, f, P

DIN rail

Panel Meter PCE-N25S

84,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter is used for processing standardised signals. Depending on your specific needs, the panel meter can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the panel meter is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Panel Meter PCE-N24H

89,90 €

Price excl. VAT &. delivery
2 year Warranty

The digital panel meter is is used to show DC voltage parameters. The panel meter can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this panel meter.

- Power supply:
   230 V, 110 V, 24 V, 20 ... 40 V AC/DC,
   85 ... 253 V AC/DC (selectable)
- Input signal: ±100 V DC, ±250 V DC,
   ± 400 V DC, 1 A DC, 5 A DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

Note: This item must be configured before ordering!

Panel Meter PCE-N24S

89,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter is used for the signal processing of 4 .. 20 mA. The panel meter has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

Panel Meter PCE-N24Z

90,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter is used to display AC parameters. The panel meter can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this panel meter.

- Power supply:
   230V, 110V, 24V, 20 ... 40V AC/DC,
   85 ... 253 V AC/DC (selectable)
- Input signal:
   1 ... 100V, 2.5 ... 250V, 4 ... 400V,
   20 ... 500 Hz, 1 A, 5 A (selectable)
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

Panel Meter PCE-N25T

94,90 €

Price excl. VAT &. delivery
2 year Warranty

The digital panel meter is used for processing signals coming from temperature sensors. Depending on your specific needs, the panel meter can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the panel meter is freely scalable, which increases its application possibilities.

- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

Panel Meter PCE-N50B

98,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter has a RS485 Modbus interface. This digital Modbus panel meter can display the measured data of up to 10 slave devices or registers.

- Interface: RS 485 Modbus RTU Master
- Number of slave devices / registers: 10
- Baud rate individually adjustable
- Further power supply area

Panel Meter PCE-N30O-1

101,53 €

Price excl. VAT &. delivery
2 year Warranty

Two counters / tri-color digital display / 2 alarm relays / freely scalable / 2 control inputs / optional analog output and RS-485 / front 65 IP.

- 2 internal counters
- Front IP 65
- 3 colour indication display
- 2 alarm outputs

Panel Meter PCE-N30O-2

101,53 €

Price excl. VAT &. delivery
2 year Warranty

Two counters / tri-color digital display / 2 alarm relays / freely scalable / 2 control inputs / optional analog output and RS-485 / front 65 IP.

- 2 internal counters
- Front IP 65
- 3 colour indication display
- 2 alarm outputs

Panel Meter PCE-N20U

109,90 €

Price excl. VAT &. delivery
2 year Warranty

The PCE-N20U is a panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel meter also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Panel Meter PCE-PA39

109,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter is designed to monitor AC power. This analogue indicator can be installed onto switch panels. The panel meter is a moving-coil ammeter. Active power as well as apparent power can be measured by means of this panel meter.

- Moving-coil meter to measure electric power
- 96 x 96 mm
- Panel installation

Panel Meter PCE-EP29

124,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter or display is designed to measure simple three-phase-voltages. The panel meter is designed for alternating currents and can measure up to 500 V directly without the need of a transformer (phase-to-phase). The panel meter is designed in CAT III and can be applied to many monitoring tasks of voltages in system control.

- Analogue voltmeter with change over
- 96 x 96 mm
- Panel installation

Panel Meter PCE-N20T

124,90 €

Price excl. VAT &. delivery
2 year Warranty

The digital panel meter is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the panel meter. Depending on the actual values, the temperature can be shown in three different colors, which makes it easier to evaluate them.

- Input: Pt100, thermocouple type J or type K
- Accuracy: ± (0.2 % FS + 1 dgt.)
- two open collector outputs
- 24 V power supply sytem for sensors and transducers
- 5-digit, three-coloured LED display

Panel Meter PCE-N20Z

129,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the panel meter.

- Input:
   1A AC, 5A AC, 100V AC, 250V AC,
   400 V AC, 20 ... 500 Hz (selectable)
- Supply voltage:
   85 ... 253V AC/DC / 20 ... 40 V AC/DC (selectable)
- Display: 5 digits, three colors
- Digit height: 14 mm / 0.55"

Panel Meter PCE-N30O-3

155,21 €

Price excl. VAT &. delivery
2 year Warranty

Two counters / tri-color digital display / 2 alarm relays / freely scalable / 2 control inputs / optional analog output and RS-485 / front 65 IP.

- 2 internal counters
- Front IP 65
- 3 colour indication display
- 2 alarm outputs

Panel Meter PCE-DPD-U

172,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter can be configured as AC and DC voltmeters (up to 600 Vac / DC), AC and DC ammeters (up to 5 AAC / DC). Furthermore, the built-in display shows measured values of process signals (mA, VDC), thermocouples, resistive temperature sensors (Pt, Ni, PTC and NTC), resistors, potentiometers and frequency.

Input:
2-, 3- wire
Thermocouples
Potentiometer
Resistance
Process signals
Frequency
DC voltage
DC power
AC voltage
AC power

Panel Meter PCE-N30O-4

175,00 €

Price excl. VAT &. delivery
2 year Warranty

Two counters / tri-color digital display / 2 alarm relays / freely scalable / 2 control inputs / optional analog output and RS-485 / front 65 IP.

- 2 internal counters
- Front IP 65
- 3 colour indication display
- 2 alarm outputs

Panel Meter PCE-ND10

179,90 €

Price excl. VAT &. delivery
2 year Warranty

The panel meter is able to perform current, voltage and power measurements in 3-phase systems. By using appropriate transducers, it is also possible to measure high currents and voltages with the panel meter. Thepanel meter was designed for panel-mounting in 92 x 92 mm panel cut-outs.

- Power meter for panel-mounting (92 x 92 mm)
- Measurement of U, I, f, P, Q, S, PF...
- Power supply via voltage input
- Alarm function
** Different variants can be selected! Note: This item must be configured before ordering! **