The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets - incl. type 2 plug and adapter to type 1
The car measuring device PCE-HVAC 6 was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6 car measuring device is ideal for many inspection and maintenance jobs in this area.
- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
PCE-IVE 300 is a car measuring device or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the car measuring device captures both picture and video and saves the files to an SD card memory (included).
- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating
The car measuring device PCE-IVE 320 is a borescope, inspection camera, videoscope or industrial endoscope that comes with a rigid telescoping pole that extends up to 2.3 m (7.6 ft) in length (3 m / 9.8 ft long total with camera connection). Plus, the car measuring device has a 0.3 megapixel camera with a 23 mm (0.91 in) diameter flexible head with microphone and 12 white LEDs offering adjustable brightness. Includes wheel attachment for under vehicle inspection.
- Telescopic pole extends up to 2.3 m / 7.6 ft (3 m /9.8 ft long total with camera connection) - 12.7 cm / 5" LCD monitor with 800 x 480 pixel resolution - Video recording capability - Accommodates SD memory cards from 2 ... 32 GB - Spare battery to allow all day operation
The PCE-IVE 330 car measuring device or inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment.
Thanks to the 3 m / 9.8 ft telescopic rod of the car measuring device, it is also possible to view areas that are difficult to access. Visual monitoring with the car measuring device is supported by the flexible camera head.
- Camera length: 320 mm / 12.5" - Camera diameter: 23 mm / 0.9" - Flexible camera head - 8" LCD monitor - Memory function
The motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the car measuring device, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.
The motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the car measuring device, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.
Motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 UVA high-power LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm.
Motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 high-power UVA LEDs (385 nm), which together generate a light intensity of 317 μW/cm² at a distance of 30 cm.
- Flash frequency 60 ... 300000 FPM
- Light colour: UV light (380 ... 390 nm)
- Accuracy: 0.001 %
- Digital pulse width modulation
- Phase shift - 360 ° ... + 360 °
- Quick adjustment with x2 and ÷2 button - 3 UVA high-power LEDs
The car measuring device is characterized by the OLED display. The OLED display on this car measuring device allows the display itself to be read in the dark, as it is self-luminous.
- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
The cat measuring device is characterized by the OLED display. The OLED display on this car measuring device allows the display itself to be read in the dark, as it is self-luminous.
With the car measuring device AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the car measuring device.
Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
The car measuring device is battery powered and easy to use. This car measuring device can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.
- Frequency range: 100 Hz to 10 kHz - headphones, 70 mm sensor, 290 mm sensor - Weight: 240 g, with battery - Dimensions: 206 mm x 50 mm x 32 mm
PCE-VE 1000 is a car measuring device, borescope, videoscope or inspection camera display featuring an exceptionally large 7" high-resolution LCD screen for impressive on-screen viewing capabilities.
- Stores photos and saves videos with sound to the included 8 GB SD memory card (max. compatibility 32 GB) for quick and easy transfer to a computer - 360° image rotation (in 90° steps) - Digital zoom on camera
Display only. Camera cables (from diam. 5.5 mm / 0.22 in, 2-way, 4-way articulation) are sold separately. See accessories to customize.
The multiway car measuring device with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.
The two-way optics is a great advantage of the car measuring device or inspection camera. There is easy control of the camera head with the car measuring device.
The car measuring device allows you to capture images and videos, and the videos are also stored with an audio recording.
The car measuring device PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This car measuring device captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.
- Cable length: 30 m / 98 ft - Camera head diameter: 28 mm / 1.1 in - SD card memory included - Waterproof cable and camera
The two-way optics is a great advantage of the car measuring device. There is easy control of the camera head with the car measuring device.
The car measuring device allows you to capture images and videos, and the videos are also stored with an audio recording.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
