Vibration Meter / Vibration Tester

Vibration Meter PCE-VT 3950S
US$ 2,133.00
ex. VAT, ex. delivery costs
The vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges
- Acceleration: 
  0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 
  0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s
- Displacement: 
  0.000 ... 3.9 mm / 0.000 - 0.154 in
- Data logger
- FFT analysis
- Route measurement
- Rechargeable battery
- Color graphic display
- incl. headset
- Automatic ISO 10816-3 evaluation
Vibration Meter PCE-VT 3950S-ICA incl. ISO-calibration certificate
US$ 2,376.00
ex. VAT, ex. delivery costs
The vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges
Acceleration: 
  0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 
  0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 
  0.000 ... 3.9 mm / 0.000 - 0.154 in
- Data logger
- FFT analysis
- Route measurement
- Rechargeable battery
- Color graphic display
- incl. headset
Automatic ISO 10816-3 evaluation
incl. ISO-calibration certificate
Vibration Meter Stroboscope PCE-DSX 20-US with Trigger Input
US$ 620.00
ex. VAT, ex. delivery costs
The vibration meter stroboscope is mostly used for speed or vibration measurement or for motion observations. This vibration meter stroboscope has a small design and has a low weight. Thus, the vibration meter stroboscope can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
Vibration Meter PCE-VM 25
US$ 1,968.00
ex. VAT, ex. delivery costs

The PCE-VM 25 Vibration Meter is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration Meter can be used for the measurement of a large range of parameters including acceleration, velocity and displacement.


- Vibration velocity 10 Hz ... 10 kHz, displacement to 60 mm
- True RMS, Max Hold, peak value
- OLED display
- Measurement memory
- VMID measuring point function

 

Vibration Meter PCE-VT 1100
US$ 376.00
ex. VAT, ex. delivery costs
The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10 mm
Vibration Meter PCE-VT 1100S
US$ 376.00
ex. VAT, ex. delivery costs
The vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration
- Portable and battery operated
- Needle probe: 45 mm / 1.77 in
Vibration Meter PCE-VT 1100M
US$ 409.00
ex. VAT, ex. delivery costs
The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Easy to handle and battery operated
- Standard probe: 10 mm
- including magnetic sensor
Vibration Sensor PCE-PVS 10
US$ 713.00
ex. VAT, ex. delivery costs
The Vibration Sensor has been developed for the continuous monitoring of the vibration speed. The Vibration Sensor is available in different versions. Depending on the type of Vibration Sensor, a distinction is made between design and measuring range.

- Measuring range: ± 12.7 mm / s
- Frequency range: 3 ... 1500 Hz
- Design: vertical connection
- Power supply: 12 ... 24 V DC in current loop


Vibration Sensor PCE-PVS 20
US$ 713.00
ex. VAT, ex. delivery costs
The Vibration Sensor has been developed for the continuous monitoring of the vibration speed. The Vibration Sensor is available in different versions. Depending on the type of Vibration Sensor, a distinction is made between design and measuring range.

- Measuring range: ± 25.4 mm / s
- Frequency range: 3 ... 1500 Hz
- Design: vertical connection
- Power supply: 12 ... 24 V DC in current loop


Vibration Sensor PCE-PVS 30
US$ 713.00
ex. VAT, ex. delivery costs
The Vibration Sensor has been developed for the continuous monitoring of the vibration speed. The Vibration Sensor is available in different versions. Depending on the type of Vibration Sensor, a distinction is made between design and measuring range.

- Measuring range: ± 12.7 mm / s
- Frequency range: 3 ... 1500 Hz
- Design: horizontal connection
- Power supply: 12 ... 24 V DC in current loop


Vibration Meter PCE-VDR 10-ICA incl. ISO Calibration Certificate
US$ 1,262.00
ex. VAT, ex. delivery costs
ISO Calibration
The single-axis vibration meter or monitor with real-time measurement and data logging capabilities. This vibration analyzer records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.

Acceleration measuring range:
  0.5 ... 199.9 m/s, 
  0.05 ... 20.39 g, 
  2 ... 656 ft/s
Speed measuring range:
  0.5 ... 199.9 mm/s,
  0.05 ... 19.99 cm/s,
  0.02 ... 7.87 in/s
Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

- incl. ISO Calibration Certificate

Vibration Meter Kit PCE-VMS 100
US$ 1,319.00
ex. VAT, ex. delivery costs
This PCE-VMS 100 vibration meter is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Vibration Meter PCE-VM 20
US$ 2,495.00
ex. VAT, ex. delivery costs
The vibration meter PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration meter can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Vibration Meter Calibrator PCE-VC20
US$ 3,466.00
ex. VAT, ex. delivery costs

PCE-VC20 is a vibration meter calibrator used to calibrate vibration sensors, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with a quartz-stabilized vibration frequency of 159.15 Hz (radian frequency 1000/s).


Load-independent vibration magnitude with an RMS of:
- 10 m/s² vibration acceleration
- 10 mm/s vibration velocity
- 10 µm vibration displacement

Vibration Meter PCE-VM 22
US$ 3,545.00
ex. VAT, ex. delivery costs
The vibration meter has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration meter can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Measuring range 0 ... 200 m/s²
- Frequency: 1 ... 10,000 Hz
- Displacement
- Tachometer    
- Infrared temperature measurement   
- 4 GB data memory
- FFT analysis and wave view of the vibration
Vibration Meter PCE-VT 204
US$ 1,055.00
ex. VAT, ex. delivery costs

The PCE-VT 204 is a multifunction handheld vibration meter for condition monitoring. The vibration meter has the ability to accurately measure both rotation and vibration. An ideal tool for the testing and inspection of machine parts and components such as motors, transmissions, gears, gear boxes and wheels, this multi-purpose device measures revolutions per minute (RPMs) as well as three-axis vibration, i.e., speed or velocity, displacement and acceleration.


- Vibration measurement: Velocity or speed, acceleration and displacement
- RPM measurement: Contact / mechanical and noncontact / optical
- Internal memory for up to 1000 readings
- Min / max and data hold functions
- RS-232 port

 

Vibration Meter PCE-VT 1100-ICA incl. ISO Calibration Certificate
US$ 615.00
ex. VAT, ex. delivery costs
ISO Calibration
The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10 mm
- incl. ISO Calibration Certificate
Vibration Meter PCE-VT 1100S-ICA incl. ISO Calibration Certificate
US$ 615.00
ex. VAT, ex. delivery costs
ISO Calibration
The vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration
- Portable and battery operated
Needle probe: 45 mm / 1.77 in

- incl. ISO Calibration Certificate