Vibration Analyzer PCE-VM 400B
US$ 6,593.00
ex. VAT, ex. delivery costs
The vibration analyzer is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration analyzer has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Vibration Analyzer PCE-VM 40C
US$ 5,280.00
ex. VAT, ex. delivery costs

The PCE-VM 40C Vibration analyzer with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Vibration analyzer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Vibration analyzer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. Features a micro SD card, GSM modem, warning and alarm leds, relay output, SMS alerts, and an internal battery. 


- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Quad band GSM (optional)
- SMS alarm notifications

- Memory size of 100,000 values (SD card)
- Integrated NiMH battery
- FFT analysis, XYZ and vector sum display

 

Human Vibration Analyzer with Hand-Arm and Whole-Body Sensors PCE-VM 31-HAWB
US$ 6,730.00
ex. VAT, ex. delivery costs

The PCE-VM 31-HAWB Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Analyzer that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Human Vibration Analyzer with Whole-Body Sensor PCE-VM 31-WB
US$ 4,877.00
ex. VAT, ex. delivery costs

The PCE-VM 31-WB Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see
  accessories)

 

Vibration Analyzer PCE-VM 22
US$ 3,545.00
ex. VAT, ex. delivery costs
The vibration analyzer has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration analyzer can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer    
- Infrared temperature measurement   
- 4 GB data memory
- FFT analysis and wave view of the vibration
Human Vibration Analyzer with Hand-Arm Sensor PCE-VM 31-HA
US$ 4,600.00
ex. VAT, ex. delivery costs

The PCE-VM 31-HA Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see   
  accessories)

 

Vibration Analyzer PCE-VM 5000-KIT
US$ 3,761.00
ex. VAT, ex. delivery costs

The 4-channel PCE-VM 5000 Vibration Analyzer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration analyzer is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

Vibration Analyzer PCE-VM 5000
US$ 2,924.00
ex. VAT, ex. delivery costs

The 4-channel PCE-VM 5000 Vibration Analyzer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card

 

Vibration Analyzer PCE-VM 22-ICA incl. ISO Calibration Certificate
US$ 3,758.00
ex. VAT, ex. delivery costs
ISO Calibration
The vibration analyzer has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration analyzer can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer    
- Infrared temperature measurement   
- 4 GB data memory
- FFT analysis and wave view of the vibration
- incl. ISO Calibration Certificate
Vibration Analyzer PCE-VM 20
US$ 2,495.00
ex. VAT, ex. delivery costs
The vibration analyzer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration analyzer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Vibration Analyzer PCE-VM 5000-KIT-ICA incl. ISO Calibration Certificate
US$ 4,355.00
ex. VAT, ex. delivery costs
ISO Calibration

The 4-channel PCE-VM 5000 Vibration Analyzer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration analyzer is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration
- Including ISO Calibration Certificate

Vibration Analyzer PCE-VM 5000-ICA Incl. ISO Calibration Certificate
US$ 3,400.00
ex. VAT, ex. delivery costs
ISO Calibration

The 4-channel PCE-VM 5000-ICA Vibration Analyzer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- 4 channels / inputs
- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity, displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card
- Sampling rate: minimum 1 sec.
- Incl. ISO calibration certificate

Vibration Analyzer PCE-VM 20-ICA incl. ISO Calibration Certificate
US$ 2,719.00
ex. VAT, ex. delivery costs
ISO Calibration
The vibration analyzer PCE-VM 20-ICA is a compact device for direct evaluation of the vibration behavior of a machine. The vibration analyzer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
- incl. ISO Calibration Certificate
Human Vibration Analyzer without Sensors PCE-VM 31
US$ 2,638.00
ex. VAT, ex. delivery costs

The PCE-VM 31 Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

 

Vibration Analyzer PCE-VT 3950S
US$ 2,133.00
ex. VAT, ex. delivery costs
The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 ... 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Data logger: 50 memory locations with 43200 measured values each
- FFT analysis
- Route measurement
- Rechargeable battery
- Color graphic display
- incl. headset
Vibration Analyzer PCE-VT 3950
US$ 2,001.00
ex. VAT, ex. delivery costs
The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 ... 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Data logger: 50 memory locations with 43200 measured values each
- FFT analysis
- Route measurement
- Rechargeable battery
- Color graphic display
- incl. headset
Vibration Analyzer PCE-VT 3900S
US$ 1,829.00
ex. VAT, ex. delivery costs
The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 ... 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Data logger: 50 memory locations with 43200 measured values each
- FFT analysis
- Route measurement
- Measuring tip with handgrip
- Rechargeable battery
- Color graphic display
Vibration Analyzer Kit PCE-VMS 100
US$ 1,319.00
ex. VAT, ex. delivery costs
This PCE-VMS 100 vibration analyzer is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67