Ordering Hotline
Call to Order
Monday - Friday
9:00 a.m. - 5:00 p.m. ET
(561) 320-9162
Technical Support
Monday - Friday
9:00 a.m. - 5:00 p.m. ET
(561) 320-9162
Call to Order
Monday - Friday
9:00 a.m. - 5:00 p.m. ET
(561) 320-9162
Monday - Friday
9:00 a.m. - 5:00 p.m. ET
(561) 320-9162
PCE-CT 100 Thickness Gauge
Non-destructive coating and dry film thickness (DFT) measuring device for use on ferrous (Fe) and non-ferrous (nFe) metal substrates
PCE-CT 100 is a thickness measuring instrument used to quickly and easily determine coating thicknesses on ferrous (Fe) and non-ferrous (nFe) metals. This compact handheld coating thickness gauge uses magnetic induction (ISO 2178) and eddy current (ISO 2360) coating thickness measurement methods to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.
When accompanied by an external sensor probe (sensor probes sold separately - see accessories), this coating thickness gauge is ideal for painted and powder-coated surface testing, automotive and aircraft surface finish inspections, primed and coated materials testing, and manufacturing quality control applications. Alarm limits can be set in the coating thickness gauge to notify the user when a coating is too thick or too thin. If a coating thickness measurement falls outside the established limits, the device produces a visual and audible signal.
| Resolution | 0.1 or < 0.2% of the measured value |
| Display | High-resolution color display, backlit |
| Measuring units | μm, mm or mils |
| Menu languages | English, German, French, Italian, Spanish, Turkish, Czech, Chinese |
| Storage | Direct mode: Max. 1,000 measured values in Fe (Type F) and nFe (Type N) mode File memory: Max. 100,000 measured values |
| Calibration | Factory calibration Zero (one-point calibration) One-foil calibration (two-point calibration) Two-foil calibration Cal-through-coat calibration |
| Zero offset | Addition of a constant value to the measured value |
| Statistics parameters | N, x̅¯, σ, Max, Min, Cp, Cpk, Kvar |
| On-screen statistics displayed | x̅¯, σ, Max, Min |
| Alarm limits | Programmable with visual and audible signaling |
| Interfaces | USB 2.0, Bluetooth 4.0 |
| Operating temperature | 0 ... 50°C / 32 ... 122°F |
| Power supply | 3 x 1.5V AA batteries |
| Dimensions | Approx. 163 x 82 x 40 mm / 6.42 x 3.23 x 1.58 in (H x W x D) |
| Weight | Approx. 290 g / 0.64 lb (including batteries) |
| Ingress protection rating | IP52 (protection against dust and dripping water) |
1 x PCE-CT 100 thickness gauge
1 x USB cable
1 x PC-compatible software
1 x User manual
1 x Carrying case
Note: Sensor probes sold separately - see accessories for details.
ex. VAT, ex. delivery costs
ISO re-calibration incl. certificate for coating thickness
meter. This is often required to comply with DIN ISO 9000.
If your calibration certificate expires, you can easily return your meter for re-calibration.
We carry out the calibration and send you the device with a new calibration certificate.
**US calibration certificate is ISO 17025**
Calibration certificates are issued specifically for the customer and are excluded from the right of return
ex. VAT, ex. delivery costs
Measuring range:
Fe: 0 ... 3500 μm / 3.5 mm / 137 mil
NFe: 0 ... 3000 μm / 3.0 mm / 118 mil
Application: Angled combination probe for measurements on ferrous (iron / steel) and non-ferrous metals
ex. VAT, ex. delivery costs
Measuring range: 0 ... 1500 μm / 1.5 mm / 59 mil
Application: Angled probe for measurements on ferrous metals like iron and steel
ex. VAT, ex. delivery costs
Measuring range: 0 ... 10000 μm / 10 mm / 393 mil
Application: Angled probe for measurements on ferrous metals like iron and steel
ex. VAT, ex. delivery costs
Measuring range: 0 ... 3500 μm / 3.5 mm / 137 mil
Application: Angled probe for measurements on ferrous metals like iron and steel
ex. VAT, ex. delivery costs
Measuring range: 0 ... 1500 μm / 1.5 mm / 59 mil
Application: Angled combination probe for measurements on ferrous (iron / steel) and non-ferrous metals inside pipes
ex. VAT, ex. delivery costs
Measuring range: 0 ... 1500 μm / 1.5 mm / 59 mil
Application: Angled combination probe for measurements on ferrous (iron / steel) and non-ferrous metals
ex. VAT, ex. delivery costs
Measuring range: 0 ... 200 μm / 0.2 mm / 7 mil
Application: High-precision combination probe for thin layers on ferrous (iron / steel) and non-ferrous metals
ex. VAT, ex. delivery costs
Measuring range: 0 ... 1500 μm / 1.5 mm / 59 mil
Application: Probe for measurements on ferrous metals like iron and steel
ex. VAT, ex. delivery costs
Measuring range: 0 ... 1500 μm / 1.5 mm / 59 mil
Application: Probe for measurements on non-ferrous metals
ex. VAT, ex. delivery costs
Measuring range: 0 ... 1500 μm / 1.5 mm / 59 mil
Application: Combination probe for measurements on ferrous (iron / steel) and non-ferrous metals
ex. VAT, ex. delivery costs
[zoom]
[zoom]
[zoom]
[zoom]
[zoom]
[zoom]
[zoom]
[zoom]
[zoom]
