Material Hardness Tester PCE-5000
US$ 6,341.00
ex. VAT, ex. delivery costs

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

Material Flow Index Tester / Plastometer PCE-MFI 400-US
US$ 9,860.00
ex. VAT, ex. delivery costs
The material flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow index tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Material Tester for Metals PCE-COM 20
US$ 7,755.00
ex. VAT, ex. delivery costs

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Material Tester PCE-UCD 100
US$ 6,593.00
ex. VAT, ex. delivery costs
The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
Material Tester PCE-3000ULS
US$ 4,864.00
ex. VAT, ex. delivery costs
The material tester can be used to quickly check the hardness of components even when installed. The material tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

- Measurement according to UCI method and rebound method
- Testing of HRC, HV, HB
- Measuring direction 360 °
- Large LCD
- USB interface
- incl. UCI probe & type D Leebsonde
Material Tester PCE-3000U
US$ 3,623.00
ex. VAT, ex. delivery costs

The UCI material tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- One 50 N UCI probe included

 

Material Tester PCE-3000UL
US$ 3,454.00
ex. VAT, ex. delivery costs

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- 2 probes for UCI and Leeb rebound testing

 

Material Hardness Tester PCE-5000
US$ 6,341.00
ex. VAT, ex. delivery costs

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

Material Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The material tester is a versatile measuring device. This is made possible by the various optional sensors on the material tester. Thanks to the surface temperature sensor, the material tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
US$ 7,959.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Material Tester PCE-3500-10 incl. 10N probe
US$ 4,996.00
ex. VAT, ex. delivery costs

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting


Material Tester PCE-CPT 20
US$ 3,465.00
ex. VAT, ex. delivery costs

PCE-CPT 20 is a Material Tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Material Tester aids in determining coating strength, durability and elasticity.


- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm

 

Material Tester PCE-RT 2300
US$ 3,070.00
ex. VAT, ex. delivery costs
The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized drive unit that allows the material tester to determine the surface roughness even on curved surfaces, grooves, and complex profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range:  Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity 
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces 
Material Tester PCE-RT 2200
US$ 2,858.00
ex. VAT, ex. delivery costs
The portable and easy-to-use material tester with an OLED display is particularly suitable for quick and accurate measurements in the workshop or laboratory. The material tester uses a DSP chip for control and data processing at high speed and low energy consumption.

- 21 measurement parameters:
   Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc,
   Rmax, Ry (JIS), Rz (JIS), RP (ASME), Rpm (ASME),
   Rv (ASME), R3z, R3zmax, Rz1max, Rmr (c), Rdc, Rmr
- Large graphic OLED display
- Memory: 20 measurement histories with all parameters
- USB interface
Material Tester PCE-HT 225E
US$ 2,903.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a material test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

Material Tester PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The material tester is a versatile measuring device. This is made possible by the various optional sensors on the material tester. Thanks to the surface temperature sensor, the material tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Material Tester PCE-3500 incl. 50N probe
US$ 4,996.00
ex. VAT, ex. delivery costs

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.


- Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Material Surface Roughness Tester PCE-RT 10
US$ 1,737.00
ex. VAT, ex. delivery costs

The Material Surface Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.02 to 50um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)