Material Tester

• Measuring range: 2 ... 5000 µm
• Accuracy: 1 µm
• FE / nFE metals
• Wireless interface for Windows, iOS and Android
• OLED display
• Swiveling probe
• IP54 housing

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

• Measuring principle: Leeb Rebound method
• Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
• Accuracy: ± 0.5%; Repeatability: ± 0.8%
• Type D impact device
• Includes ISO calibration certificate

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.4%, Repeatability: ± 0.6%
• Impact Device: Type D
• Measuring Direction: 360°
• Internal measured value memory

• Measuring range: 2 ... 1000 µm
• Resolution: 0.1 µm
• for FE metals
• Wireless interface for Windows, iOS and Android
• OLED display
• IP64 housing

The Leeb Material Hardness Tester for Metal PCE-900-ICA measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Material Hardness Tester for Metal measures the metal hardness in 6 different hardness scales. 

• Measurement according to Leeb Rebound method
• Testing of HRC, HRB, HV, HB, HSD
• Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
• Accuracy: 0.80% / Repeatability: 1.10%
• Incl. type D Leeb probe
• Optional Software Available
• incl. ISO Calibration Certificate

PCE-1000N is a portable handheld Material Tester used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.

• Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster  (HW)  Rockwell (HRB / HRE / HRF / HRH)
• Measuring range: 0 … 100 HBA / 25 … 150 HB
• Accuracy: 81 … 88 HBA: ± 1 HBA / 42 … 48 HBA: ± 2 HBA
• Repeatability: 81 … 88 HBA: ± 1.5 HBA / 42 … 48 HBA: ± 2.5 HBA
• Resolution: 0.1 HBA
• Meets ASTM standards: E140-97; D2583-75; B648-78

Due to its compact design, the PCE-2550-ICA material tester is easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester is very versatile.

• Measuring ranges: 170 … 960 HLD
• Measurement direction: 360°
• Impact device: Type D
• Measurement units: HL, HB, HRB, HRC, HRA, HV, HS
• Internal measurement memory
• incl. ISO Calibration Certificate

• Layer thickness: 2 ... 5000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Standard FE probe with sliding sleeve and prism

• Layer thickness: 2 ... 5000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Standard FE probe with sliding sleeve and prism, swiveling

PCE-950 is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

• Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA /19-655 HB / 80-976 HV / 32.2-115 HS 
• Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
• Accuracy: ± 2% / Repeatability: ± 2%
• Impact device: Type D (integrated)
• Data Analysis Software
• For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals

• Layer thickness: FE: 2 ... 5000 µm
• Coating thickness: NF: 2 ... 2000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Dual probe with sliding sleeve and prism

• Layer thickness: 2 ... 7000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• FE probe for thick layers with sliding sleeve and prism

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for small indoor spaces

• Layer thickness: 2 ... 6000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for interiors and pipes

The Material Surface Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.

• Measures Ra in Metric (µm) and Imperial (µinch)
• Ra 0.05 to 10um / 2 µinch … 400 µinch measurement range
• Rz 0.02 to 50um / 3.93 µinch … 1968.50 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• With threshold function
• Uses 4 AA Batteries (Included)

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Spring-loaded measuring probe for small parts and complex surfaces

• Layer thickness: FE: 2 ... 5000 µm
• Coating thickness: NF: 2 ... 2000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Dual probe with sliding sleeve and prism, swiveling

The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

• Nominal kinetic energy: 4.5 J
• For high-strength concrete
• Simple and quick operation
• For determining concrete hardness
• Schmidt principle

PCE-950-ICA is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

• Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA /19-655 HB / 80-976 HV / 32.2-115 HS 
• Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
• Accuracy: 2% / Repeatability: 2%
• Impact device: Type D (integrated)
• Data Analysis Software
• For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
• Includes ISO calibration certificate

The Material Surface Roughness Tester PCE-RT 10-ICA is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.

• Measures Ra in Metric (µm) and Imperial (µinch)
• Ra 0.05 to 10um / 2 µinch … 400 µinch measurement range
• Rz 0.1 to 50um / 3.93 µinch … 1968.50 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• With threshold function
• Uses 4 AA Batteries (Included)
• Incl. ISO calibration certificate

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery

• Permeability: 1,000 ... 5,000 µr
• Resolution: 0.001 µr
• Accuracy: (µr - 1) x 5%
• Graphic LCD touch panel
• Scan measurement function
• Internal data logger
• Interfaces for data transmission
• Operation via battery or USB
• App for Android, iOS and Windows

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery
• Incl. ISO calibration certificate

• Coating thickness: 13 ... 5500 µm
• Material thickness: 300 ... 14800 µm
• Resolution: 1 µm
• Accuracy: 3% of the weight
• Multilayer measurements
• Waveform display
• Adjustable sonic velocity
• Continuous measurement possible
• Internal memory for 999 data records
• PC software

The Bluetooth material surface roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Large OLED display
• Display for the position of the probe
• Micro-USB interface
• Bluetooth
• Download the app for free from the Google Play Store

The material surface roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

• Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
• Measurement accuracy: <± 10%
• Micro USB interface
• 3 different cut-off wavelengths
• PC software