Ordering Hotline

Call to Order
 Ordering hotline

Monday - Friday
9:00 a.m. - 5:00 p.m. ET

(561) 320-9162

Technical Support

Technical advice

Monday - Friday
9:00 a.m. - 5:00 p.m. ET

(561) 320-9162

  1. You are here:
  2. Home
  3. Humidity Detector PCE-PMI 4
Order no.: PCE-PMI 4

Humidity Detector PCE-PMI 4

US$ 632.00
:
4250348722270
PCE-PMI 4
ex. VAT, ex. delivery costs
Available in: 1-2 days

Description

Humidity Detector PCE-PMI 4
Humidity Detector with eight spring electrodes / Many scales already deposited / 
Non-destructive measurement on floors and walls / Large graphic display / 
Measurement display both numerical and graphical / Max HOLD function

The humidity detector is a measuring device for nondestructive moisture measurement on concrete and screed. Here, the spring electrodes of the humidity detector are pressed onto the surface to be tested. Within seconds, the humidity detector will show the moisture content to the operator. Different scales are already stored in the humidity detector for a wide variety of surfaces. These are available to the operator directly from the humidity detector. 

As another special feature, the humidity detector has an automatic shutdown. This feature automatically shuts off the meter if the moisture meter is not used for 5 minutes. This prevents a sudden discharge of the battery at the humidity detector. Another function of the humidity detector is the Max HOLD function. This feature only displays the highest reading to the operator. 

Highlights

- For measuring the moisture in concrete and screed
- Numeric and graphical view 
- Eight spring electrodes are used for the measurement
- Automatic shutdown 
- Ergonomic shape with anti-slip rubber
- Normal measurement and max. HOLD display

Specification

Measuring function Measuring range
Concrete (H2O) 0 ... 6%
Cement screed (H2O) 0 ... 6%
cement screed 0 ... 4%
(Calcium carbide method)*  
Anhydrite screed (H2O)   0 ... 3.5%
anhydrite  0 ... 1.9%
(Calcium carbide method)*             
Caisson scale 0.3 ... 15.3 m
Relative scale 0 ... 100%
*The calcium carbide method is approximate.
   
Further specification  
Accuracy ± 0.5%
Resolution
 0.1%
Display Graphically monochrome, 128 x 64 pixels,
  61 x 33 mm / 2.4 x 1.3 in, backlight
Operating conditions 5 ... 40°C / 41 ... 104°F
Automatic shutdown After 5 minutes of inactivity
Power supply 2 x 1.5V AA batteries
Uptime About 20 hours
Dimensions 147 x 89 x 33 mm / 5.8 x 3.5 x 1.3 in
Weight Approx. 250 g / < 1 lb (with batteries)
   


Delivery Scope

1 x Humidity Detector PCE-PMI 4
1 x Transport case
1 x 2 x 1.5V AA battery
1 x User manual

Downloads

Accessories

Accessories

Moisture Meter
Brush Electrode PCE-PMI 4-B120
US$ 137.00

ex. VAT, ex. delivery costs

Brush electrode, for measuring in bores for PCE-PMI 4

Two needles 120 mm long
Variable distance
Brushes 40 mm long
7 mm diameter
Cable 920 mm long
of which 460 mm divided
3.5 mm jack plug
Test Instruments manufacturer
Moisture Meter
Penetration Probe PCE-PMI 4-ST230
US$ 137.00

ex. VAT, ex. delivery costs

Penetration probe with insulated needles (measurement only at the tips), approx. 230 mm long, for PCE-PMI 4, for example, in insulating materials or in joints or holes.

Two needles approx. 230 mm long
Thickness with insulation 4 mm
Variable distance
Cable 920 mm long
of which 460 mm divided
3.5 mm jack plug
Test Instruments manufacturer
Moisture Meter
Penetration Probe PCE-PMI 4-ST100G
US$ 137.00

ex. VAT, ex. delivery costs

Penetration probe with fixed needle spacing for measuring styrofoam and other insulation materials

Two needles 100 mm long
2 mm thickness
Distance in the middle 18 mm
Cable 780 mm long
3.5 mm jack plug
Test Instruments manufacturer