Order no.: PCE-2000N

Hardness Tester PCE-2000N

US$ 1,168.00
:
4250348718402
PCE-2000N
ex. VAT, ex. delivery costs
Available in: 1-2 days

Description

Hardness Tester PCE-2000N
Hardness tester for metallic materials / Different impactors available / 7 different hardness scales / Save the data on USB stick

The PCE-Instruments PCE-2000N hardness meter uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface. The impact of the hard metal ball on the test surface results in a plastic deformation of the surface at the point of impact. From this deformation results in an energy loss, which is proportional to the workpiece hardness and can be determined by the ratio of rebound to impact velocity of the specimen. 

This technology enables a compact design, which makes it particularly suitable for the hardness tester. In contrast to static test methods with heavy hardness testing machines, a mobile hardness tester can be used very flexibly in the incoming or outgoing inspection, in production and generally in all areas where hardness has an influence on quality parameters. The hardness tester from PCE Instruments can be used to measure six different hardness scales (HL, HV, HRA, HRC, HB, HV, HS) as well as ten different materials.

As standard, the hardness meter is supplied with a striker D, but optional additional impactors (DC, DL, C, D + 15, E, G) can be connected for more specific applications. In addition, the data can be saved directly on a USB stick, which further extends the flexibility of this mobile hardness tester. With a highly readable OLED display, a long standby time, a handy housing and a symbol-based menu navigation, the handling of the mobile hardness tester is extremely user-friendly.

Highlights

- Measures all common hardness parameters
- External impact device on 1.5 m / 4.9 ft cable
- large measuring range
- High precision
- Storage data measurements on USB stick
- Various other impactors as accessories
- Measurement in different angles possible
- Color display

Specification

Measuring ranges 170 ... 960 HLD
17.9 ... 69.5 HRC
19 ... 683 HB
80 ... 1042 HV
30.6 ... 102.6 HS
59.1 ... 88 HRA
13.5. .. 101.7 HRB
   
Impact device included
(optional impact devices)
D
(DC, D + 15, C, G, DL)
   
Cable length impact device About 1.5 m / 4.9 ft
Accuracy ± 0.5% (@ 800 HLD)
Repeatability 0.8% (@ 800 HLD)
   
Hardness scales HL (Leeb)
HV (Vickers)
HB (Brinell)
HS (Shore)
HRA (Rockwell A)
HRB (Rockwell B)
HRC (Rockwell C)
   
Measurable materials Steel
Cast steel
Alloy steel
Stainless steel
Gray glacé
Ductile iron
Cast aluminum alloy
Cu-zinc (brass)
Copper-tin alloy,
Copper
   
Display resolution 128 x 64 pixel OLED
Data storage 600 averages in 6 data groups
Data output USB stick
Power supply 3 x AA 1,5V-batteries
Auto Power-Off if not in use, the device shuts off automatically after 12 minutes
Operating conditions 10 ... 50°C / 50 ... 122°F, 20 ... 90% rh
Storage conditions -30 ... 60°C / -22 ... 140°F
Dimensions 160 x 80 x 40 mm / 6.3 x 3.1 x 1.6 in (H x W x D)
Weight Measuring device with batteries: approx. 300 g / < 1 lb
Impact device : approx. 75 g / < 1 lb
   
Material  
Steel / cold rolled steel HRA 59.1 ... 85.8
HRC 20 ... 68.5
HRB 38.4 ... 99.6
HB 127 ... 651
HSD 32.2 ... 99.5
HV 83 ... 976
   
Alloyed tool steel HRC 20.4 ... 67.1
HV 80 ... 898
   
Stainless steel HRB 46.5 ... 101.7
HB 85 ... 655
HV 85 ... 802
   
Cast iron HB 93 ... 334
   
Ductile iron HB 131 ... 387
   
Cast aluminum HRB 23.8 ... 84.6
HB 19 ... 164
   
Brass HRB 13.5 ... 95.3
HB 40 ... 173
   
Bronze HB 60 ... 290
   
Copper HB 45 ... 315
   


Delivery Scope

1 x Hardness tester PCE-2000N
1 x Hardness comparison block
1 x Striker type D
1 x Transport case
1 x Cleaning brush
1 x User manual
3 x AA 1,5V-batteries
2 x Stabilization ring
1 x 2 GB USB stick

Downloads