Gas Leak Detector Gas-Pro-3
US$ 2,525.03
ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


- Purpose: Personal protection
- Sensor type: CO / CO2 / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. Please email jmu@pce-
  instruments.com (UK) or rhe@pce-instruments.com (US) for details


Gas Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector Xgard Type 1 PH3
US$ 1,805.63
ex. VAT, ex. delivery costs

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Xgard-IR
US$ 855.50
ex. VAT, ex. delivery costs
The Xgard IR Gas Leak Detector is a rugged, explosion-proof gas sensor for hydrocarbons or carbon dioxide. The Xgard IR gas leak detector is available in different versions, depending on which gases it is to be used for. The gas leak detector measures the respective gases using a dual wavelength infrared sensor.

- Various finishes available
- Explosion-proof construction with ATEX approval
- Infrared sensor
- 3-wire 4...20 mA output
Gas Leak Detector Xgard Type 1 O3
US$ 1,619.51
ex. VAT, ex. delivery costs

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Xgard Type 1 H2
US$ 1,648.55
ex. VAT, ex. delivery costs

The Xgard-1-H2 is a single-gas Gas Leak Detector used to warn for gases (Hydrogen, H2, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H2, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Xgard Type 1 NH3
US$ 1,571.99
ex. VAT, ex. delivery costs

The Xgard-1-NH3 is a single-gas Gas Leak Detector used to warn for gases (Ammonia, NH3, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH3, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector PCE-LDC 15
US$ 4,353.00
ex. VAT, ex. delivery costs
The gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Gas Leak Detector Xgard Type 1 NO2
US$ 1,354.19
ex. VAT, ex. delivery costs

The Xgard-1-NO2 is a single-gas gas sensor used to warn for gases (Nitrogen dioxide, NO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Nitrogen dioxide, NO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector IRmax
US$ 2,374.79
ex. VAT, ex. delivery costs
The gas leak detector IRmax is a robust gas sensor for flammable gases. The gas leak detector IRmax is delivered ready-calibrated for 1 of 21 different configurations. Of course, the gas leak detector has ATEX approval and can also be used in potentially explosive areas.

- Calibrated for 1 of 21 different configurations
- ATEX approval
- Very reliable, even under the toughest conditions
- Low maintenance and energy saving
Gas Leak Detector Xgard Type 1 CL2
US$ 1,276.31
ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Flamgard-Plus
US$ 2,691.00
ex. VAT, ex. delivery costs
The Flamgard-Plus gas leak detector is a robust, flame-proof gas sensor for highly flammable gases. The Flamgard-Plus gas leak detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of integrated catalyst beads.

- Different versions available
- Flame-proof construction with ATEX approval
- Measurement with catalyst beads
- 3-wire 4 ... 20 mA output
Gas Leak Detector Xgard Type 1 CO
US$ 1,083.59
ex. VAT, ex. delivery costs

The Xgard-1-CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Gas Leak Detector IRmax
US$ 2,374.79
ex. VAT, ex. delivery costs
The gas leak detector IRmax is a robust gas sensor for flammable gases. The gas leak detector IRmax is delivered ready-calibrated for 1 of 21 different configurations. Of course, the gas leak detector has ATEX approval and can also be used in potentially explosive areas.

- Calibrated for 1 of 21 different configurations
- ATEX approval
- Very reliable, even under the toughest conditions
- Low maintenance and energy saving
Gas Leak Detector Xgard Type 1 H2S
US$ 1,083.59
ex. VAT, ex. delivery costs

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 ... 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen sulfide, H₂S, 0 ... 25 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Gas-Pro-1
US$ 1,496.75
ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-1 can gauge with its sensors a maximum of four different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-1 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


- Purpose: Personal protection
- Sensor type: CO / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

 

Gas Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB