Gas Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Detector PCE-LDC 15
US$ 4,353.00
ex. VAT, ex. delivery costs
The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Gas Leak Detector PCE-LDC 15
US$ 4,353.00
ex. VAT, ex. delivery costs
The gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Gas Detector Gas-Pro-2
US$ 2,244.00
ex. VAT, ex. delivery costs

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


- Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
- Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)


Gas Leak Detector Gas-Pro-3
US$ 2,525.03
ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


- Purpose: Personal protection
- Sensor type: CO / CO2 / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. Please email jmu@pce-
  instruments.com (UK) or rhe@pce-instruments.com (US) for details


Gas Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector PCE-LDC 8
US$ 2,145.00
ex. VAT, ex. delivery costs
The Gas Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Gas Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound
- Measuring principle: air, coolant, non-explosive gases
- Working frequency of 40 kHz
- up to 6 h battery operation 
- Leak detection via headphones and LCD display
- Localize leaks up to 18m, 59 ft.
Gas Leak Detector PCE-LDC 15
US$ 4,353.00
ex. VAT, ex. delivery costs
The condition monitoring gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Gas Detector Flamgard-Plus
US$ 2,691.00
ex. VAT, ex. delivery costs
The Flamgard-Plus gas detector is a robust, flame-proof gas sensor for highly flammable gases. The Flamgard-Plus gas detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of integrated catalyst beads.

- Different versions available
- Flame-proof construction with ATEX approval
- Measurement with catalyst beads
- 3-wire 4 ... 20 mA output
Gas Leak Detector Gas-Pro-1
US$ 1,496.75
ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-1 can gauge with its sensors a maximum of four different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-1 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


- Purpose: Personal protection
- Sensor type: CO / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

 

Gas Detector IRmax
US$ 2,374.79
ex. VAT, ex. delivery costs
The gas detector IRmax is a robust gas sensor for flammable gases. The gas detector IRmax is delivered ready-calibrated for 1 of 21 different configurations. Of course, the gas detector has ATEX approval and can also be used in potentially explosive areas.

- Calibrated for 1 of 21 different configurations
- ATEX approval
- Very reliable, even under the toughest conditions
- Low maintenance and energy saving
Gas Leak Detector IRmax
US$ 2,374.79
ex. VAT, ex. delivery costs
The gas leak detector IRmax is a robust gas sensor for flammable gases. The gas leak detector IRmax is delivered ready-calibrated for 1 of 21 different configurations. Of course, the gas leak detector has ATEX approval and can also be used in potentially explosive areas.

- Calibrated for 1 of 21 different configurations
- ATEX approval
- Very reliable, even under the toughest conditions
- Low maintenance and energy saving
Gas Leak Detector IRmax
US$ 2,374.79
ex. VAT, ex. delivery costs
The gas leak detector IRmax is a robust gas sensor for flammable gases. The gas leak detector IRmax is delivered ready-calibrated for 1 of 21 different configurations. Of course, the gas leak detector has ATEX approval and can also be used in potentially explosive areas.

- Calibrated for 1 of 21 different configurations
- ATEX approval
- Very reliable, even under the toughest conditions
- Low maintenance and energy saving
Gas Leak Detector Flamgard-Plus
US$ 2,691.00
ex. VAT, ex. delivery costs
The Flamgard-Plus gas leak detector is a robust, flame-proof gas sensor for highly flammable gases. The Flamgard-Plus gas leak detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of integrated catalyst beads.

- Different versions available
- Flame-proof construction with ATEX approval
- Measurement with catalyst beads
- 3-wire 4 ... 20 mA output
Gas Leak Detector Flamgard-Plus
US$ 2,691.00
ex. VAT, ex. delivery costs
The Flamgard-Plus gas leak detector is a robust, flame-proof gas sensor for highly flammable gases. The Flamgard-Plus gas leak detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of integrated catalyst beads.

- Different versions available
- Flame-proof construction with ATEX approval
- Measurement with catalyst beads
- 3-wire 4 ... 20 mA output
Gas Detector AQ-500 Set EF
US$ 2,760.00
ex. VAT, ex. delivery costs

The Gas Detector AQ-500 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Digital output: RS232 with USB converter
- Data Logger: 8188 values
- PC transfer: Software and data cable included

Gas Leak Detector AQ-500 Set EF
US$ 2,760.00
ex. VAT, ex. delivery costs

The Gas Leak Detector AQ-500 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Digital output: RS232 with USB converter
- Data Logger: 8188 values
- PC transfer: Software and data cable included