Gas Detector AQ-300 Set OZL

Order no.: AQ-300 Set OZL
US$ 1,359.00
AQ-300 Set OZL
ex. VAT, ex. delivery costs
Available in: 10 - 14 days
Gas Detector for measurement of ozone / Many different sensors available /
Broad range of application / Replaceable sensor head / Alarm function / Sensor OZL included 
Optional sensor for temperature and humidity

The Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range. Furthermore, the Gas Detector has sensor heads for other gases available, which are automatically recognized when plugged into the device. Thus, you can use the Gas Detector in many different areas. The possibilities of the Gas Detector extend the use of ozone in your processes for bleaching oils, greases, wax, paper, synthetic fibers, cellulose or textiles,within the paper, textile, or lubricant production industries. Another field of application for the Gas Detector is in cleaning, disinfection and sterilisation of swimming pools, water treatment facilities or after fire damage or water damage. With a head for lower measurements of up to 0.150 ppm, you can measure ozone concentrations that have a negative effect on the mental state of humans. Thanks to the leading GSS technology of the sensors, the Gas Detector not only is high precision, it also has a long lifespan. The unique possibility to refresh the sensors makes their maintenance more economical than the maintenance of other types of sensors. Depending on the model, the measured concentrations may be written to the internal memory of the Gas Detector via an analog interface with a 0... 5 V output, or the output is transferred via a USB interface to a PC. Similarly, a remote kit is available as an option, allowing the Gas Detector to take measurements in a secure room while the sensor is connected via cable to the Gas Detector. Through simplicity of operation the alarm thresholds for the optical or acoustic signal can be changed in a very short time. In addition to the measured concentrations in the LCD display, which are displayed in ppm or mg / m³, the high and low alarms are shown.


- High accuracy and functionality
- Easy to operate and maintain
- Fast response time
- Interchangeable sensor heads
- LCD display
- Battery operation
- Alarm function
- Sensor calibration function
- Max. / Min. / Average function
- Analog output

Technical Specification of the Gas Detector
Model 300 Series
As Model 200 Series, in addition:
Alarm function"High", "Low", Mute
Alarm outputTransistor output, 150-mA max
Low Alarm, High Alarm & Control
Analog output0... 5V
Location IDStorage of the measuring location
Model 200, 300 and 500 Series
Power supply12V DC
Rechargeable batteryLithium-Polymer 12V DC / 2700 mAh
Charger12.6V 2 A
Charging voltage12.6V
Charging time2... 3 hours
Lifecycle> 500 charges
HousingPC & ABS / IP20 & NEMA 1
Dimensions (incl. opt. sensorsavailable)7.7 x 4.8 x 2.1 in / 195 x 122 x 54 mm
Weight< 1 lb / 460 g (with battery)
ApprovalsEN 50082-1: 1997, EN 50081-1: 1992, CE

You can find the technical data on a variety of sensor heads to the ozone measurement device AQ series below in the "Optional accessories for ozone meter AQ series".

1 x Basic device AQ-300
1 x Sensor head OZL (Ozone 0-0.5 ppm)
1 x 12V DC 800-mA AC/DC Power Supply Unit
1 x Battery pack 12V
1 x Operating instructions.