Gas Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Detector Xgard Type 1 PH3
US$ 1,805.63
ex. VAT, ex. delivery costs

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Detector Xgard Type 1 H2
US$ 1,648.55
ex. VAT, ex. delivery costs

The Xgard-1-H2 is a single-gas Gas detector used to warn for gases (Hydrogen, H2, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H2, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Detector Xgard Type 1 O3
US$ 1,619.51
ex. VAT, ex. delivery costs

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Detector Xgard Type 1 NH3
US$ 1,571.99
ex. VAT, ex. delivery costs

The Xgard-1-NH3 is a single-gas Gas detector used to warn for gases (Ammonia, NH3, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH3, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Xgard Type 1 PH3
US$ 1,805.63
ex. VAT, ex. delivery costs

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Detector Xgard Type 1 NO2
US$ 1,354.19
ex. VAT, ex. delivery costs

The Xgard-1-NO2 is a single-gas gas sensor used to warn for gases (Nitrogen dioxide, NO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Nitrogen dioxide, NO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Detector Xgard Type 5
US$ 925.00
ex. VAT, ex. delivery costs
The Xgard Type 5 gas detector is a robust, explosion-proof gas sensor for flammable gases. The Xgard Type 5 gas detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective flammable gases with the help of an integrated pellistor.
 
- Different versions available
- Explosion-proof construction with ATEX approval
- Detection by pellistor
- 3-wire 4 ... 20 mA output
Gas Detector Xgard Type 1 SO2
US$ 1,342.31
ex. VAT, ex. delivery costs

The Xgard-1-SO2 is a single-gas Gassensor used to warn for gases (Sulfur Dioxide, SO2, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO2, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Detector PCE-LDC 15
US$ 4,353.00
ex. VAT, ex. delivery costs
The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Gas Leak Detector Xgard Type 1 H2
US$ 1,648.55
ex. VAT, ex. delivery costs

The Xgard-1-H2 is a single-gas Gas Leak Detector used to warn for gases (Hydrogen, H2, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H2, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Detector Xgard Type 1 CL2
US$ 1,276.31
ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas sas detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Gas Detector Triple Plus + BASE
US$ 2,393.03
ex. VAT, ex. delivery costs

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. Intrinsically safe, the Triple Plus+ provides enhanced features for safety and detector fleet managers including:


- Selection of flammable gas correction factors (so one unit can be used in
  several locations across a site)
- Annotation of the data file with user names and site names selected from
  pre-configured files in the unit


* Call to order or see accessories tab. Must specify sensors (see chart for details) and choose with / without internal pump. Charger and software sold separately.

 

Gas Detector Gas-Pro-2
US$ 2,244.00
ex. VAT, ex. delivery costs

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


- Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
- Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)


Gas Leak Detector Xgard Type 1 O3
US$ 1,619.51
ex. VAT, ex. delivery costs

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Gas-Pro-3
US$ 2,525.03
ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


- Purpose: Personal protection
- Sensor type: CO / CO2 / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. Please email jmu@pce-
  instruments.com (UK) or rhe@pce-instruments.com (US) for details


Gas Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector Xgard Type 1 NH3
US$ 1,571.99
ex. VAT, ex. delivery costs

The Xgard-1-NH3 is a single-gas Gas Leak Detector used to warn for gases (Ammonia, NH3, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH3, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval