Flow Meter

Air Flow Meter PCE-FST-200-201-I
US$ 277.00
ex. VAT, ex. delivery costs

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.


- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

Flow Meter PCE-AM 85
US$ 277.00
ex. VAT, ex. delivery costs
The flow meter PCE-AM 85 is an ideal companion for every outdoor activist. This lightweight flow meter with altimeter and barometer function should not be missing on any tour. The flow meter PCE-AM 85 informs you about the reached altitude of -2000 ... 9000 m / -6,561 ... 29,527 ft.

- Altimeter up to 9,000 m / 29,527 ft
- Air pressure (absolute)
- Wind speed
Multifunction Air Flow Meter PCE-AM 45
US$ 278.00
ex. VAT, ex. delivery costs
The multifunction air flow meter determines the wind speed via an impeller with a diameter of 65 mm. The air flow meter can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values
Flow Meter PCE-HWA 20BT
US$ 297.00
ex. VAT, ex. delivery costs
Wireless
The flow meter has a measuring range of 0 ... 30 m / s. In addition to the air flow, the flow meter can also measure the ambient temperature between -20 ... 60°C / -4 ... 140°F and the ambient humidity between 0 ... 100% RH.

- Wind speed measuring range: 0.00 ... 30.00 m / s
- Temperature measuring range: -20 ... 60°C / -4 ... 140° F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm
- 390 mm / 15.4 in telescopic pole
- Bluetooth 4.0 interface
Flow Meter PCE-WS CR
US$ 356.00
ex. VAT, ex. delivery costs
The Flow Meter impresses with its compact design and various output signals. The Flow Meter can be used for applications in warning technology, building automation and home technology.

- Measuring range: 0.8 m/s ... 50 m/s
- Measurement from: ≤0.8 m/s
- Output:  Adjustable relay
- IP 54 protection
- mA, V, pulse or Modbus output
Air Flow Meter PCE-FST-200-201-H-I
US$ 395.00
ex. VAT, ex. delivery costs

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.


- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

Air Flow Meter PCE-FST-200-201-H-U
US$ 395.00
ex. VAT, ex. delivery costs

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.


- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

Flow Meter PCE-FST-200-202-H-I
US$ 395.00
ex. VAT, ex. delivery costs

The Flow Meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.


- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0 … 360°

Flow Meter PCE-FST-200-202-H-U
US$ 395.00
ex. VAT, ex. delivery costs

The Flow Meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.


- Output signal: 0 … 10V DC
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0 … 360°

Flow Meter PCE-007
US$ 416.00
ex. VAT, ex. delivery costs

Flow meter with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Air Flow Meter PCE-EM 890
US$ 422.00
ex. VAT, ex. delivery costs
The air flow meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this air flow meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
- Humidity / temperature
- UV
- Air pressure
- Volume flow
- Dew point
- Wet bulb temperature
- Windchill
- Heat stress index
- Height above sea level
- External temperature over Pt1000
Flow Meter PCE-WS RS485
US$ 548.00
ex. VAT, ex. delivery costs
The Flow Meter impresses with its compact design and various output signals. The Flow Meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: Modbus RTU
- IP 65 protection 
- mA, V, pulse or Modbus output
Ultrasonic Flow Meter PCE-TDS 75
US$ 2,059.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
Ultrasonic Flow Meter PCE-TDS 100H-ICA incl. ISO Calibration Certificate
US$ 2,190.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 100HS-ICA incl. ISO Calibration Certificate
US$ 2,190.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Meter Kit PCE-TDS 100HSH
US$ 2,343.00
ex. VAT, ex. delivery costs
Topseller

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
US$ 2,520.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
- incl. ISO Calibration Certificate
Ultrasonic Flow Meter Kit PCE-TDS 100HSH-ICA incl. ISO Calibration Certificate
US$ 2,693.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-TDS 100HSH-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1
- Incl. ISO Calibration Certificate