Digital Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate
US$ 1,264.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Three-Phase Digital Multimeter PCE-GPA 62-ICA incl. ISO Calibration Certificate
US$ 1,420.00
ex. VAT, ex. delivery costs
ISO Calibration

This three-phase digital multimeter is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The three-phase digital multimeter is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Digital Multimeter PCE-123-ICA incl. ISO Calibration Certificate
US$ 924.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Digital Multimeter PCE-BMM 10
US$ 402.00
ex. VAT, ex. delivery costs
This PCE-BMM 10 digital multimeter is equipped for mobile as well as stationary operation. The digital multimeter PCE-BMM 10 can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.

- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
Digital Multimeter PCE-MCM 10-ICA incl. ISO Calibration Certificate
US$ 581.00
ex. VAT, ex. delivery costs
ISO Calibration
The digital multimeter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the digital multimeter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the digital multimeter, the digital multimeter itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC
- Measuring range 2: ±21.0 … ±99.9 mA DC
- Diameter of clamp opening: Ø5 mm
- Detachable digital multimeter with 1 m / 3.3 ft cable
- Incl. ISO Calibration Certificate
Digital Multimeter PCE-CTI 10-ICA incl. ISO Calibration Certificate
US$ 571.00
ex. VAT, ex. delivery costs
ISO Calibration
The digital multimeter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the digital multimeter is inductive. To do this, the supply line is placed in the digital multimeter.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
- incl. ISO Calibration Certificate
Digital Multimeter Data Logger PCE-BMM 10
US$ 402.00
ex. VAT, ex. delivery costs
This PCE-BMM 10 digital multimeter data logger is equipped for mobile as well as stationary operation. The digital multimeter data logger PCE-BMM 10 can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.

- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
Electrical Tester PCE-BMM 10-ICA incl. ISO Calibration Certificate
US$ 519.00
ex. VAT, ex. delivery costs
ISO Calibration
This PCE-BMM 10 electrical tester is equipped for mobile as well as stationary operation. The electrical tester can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.

- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
- incl. ISO Calibration Certificate
Digital Multimeter PCE-DC 41-ICA incl. ISO Calibration Certificate
US$ 457.00
ex. VAT, ex. delivery costs
ISO Calibration

The digital multimeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital multimeter, or you can use the integrated clamp mechanism. By using the clamp of the digital multimeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate

Digital Multimeter PCE-VA 20-ICA incl. ISO Calibration Certificate
US$ 619.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-VA 20 is a versatile Digital Multimeter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Digital Multimeter PCE-DC 50-ICA incl. ISO Calibration Certificate
US$ 466.00
ex. VAT, ex. delivery costs
ISO Calibration
The digital multimeter PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the digital multimeter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate
Three-Phase Digital Multimeter PCE-GPA 62
US$ 1,254.00
ex. VAT, ex. delivery costs

Three-Phase Digital Multimeter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Digital Multimeter PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Digital Multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The digital multimeter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Digital Thermometer PCE-EMD 10-ICA Incl. ISO Calibration Certificate
US$ 1,319.00
ex. VAT, ex. delivery costs
ISO Calibration
The digital thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 ... 122.0 °F and the humidity measuring range is 0.0 ... 99.9% RH.

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate
Digital Multimeter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Digital Multimeter PCE-CM 40-ICA incl. ISO Calibration Certificate
US$ 356.00
ex. VAT, ex. delivery costs
ISO Calibration
The flexible digital multimeter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible digital multimeter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate
Digital Multimeter PCE-123
US$ 731.00
ex. VAT, ex. delivery costs

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

 

Digital Multimeter PCE-OCM 10-ICA incl. ISO Calibration Certificate
US$ 253.00
ex. VAT, ex. delivery costs
ISO Calibration
The digital multimeter is characterized by the OLED display. The OLED display on this digital multimeter allows the display itself to be read in the dark, as it is self-luminous.

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
- incl. ISO Calibration Certificate