Test Meters

US$ 376.00

ex. VAT, ex. delivery costs

The thermo hygrometer is the ideal measuring device to check the climatic conditions in, for example, warehouses, production halls or greenhouses. The thermo hygrometer can measure the ambient temperature and humidity.

- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple
- incl. ISO Calibration Certificate

Vibration Test Instrument PCE-VT 1100

US$ 376.00

ex. VAT, ex. delivery costs

The vibration test instrument is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration test instrument, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units only
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10 mm

Vibration Test Instrument PCE-VT 1100S

US$ 376.00

ex. VAT, ex. delivery costs

The vibration test instrument is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration test instrument is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz

- Measures speed, distance, acceleration

- Holds the reading after each measurement in metric units

- Portable and battery operated

- Needle probe: 45 mm / 1.77 in

Cup Anemometer PCE-A420-ICA incl. ISO Calibration Certificate

US$ 500.00

ex. VAT, ex. delivery costs

Without a doubt, the main advantage of this handheld cup vane anemometer is that it doesn't need to be held exactly in the direction of the wind. Anemometer with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane anemometer, wind direction will not influence the measurement.

- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h
- incl. ISO Calibration Certificate

Vibration Test Instrument PCE-WVS 50

US$ 508.00

ex. VAT, ex. delivery costs

Portable vibration meter used to monitor, diagnose, control and solve problems related to the vibration velocity of various industrial equipment.

- Vibration velocity: 0,01 ... 200 mm/s

- Vibration acceleration: 0,1 ... 200 m/s²

- Vibration displacement: 2 ... 2000 μm

- Frequency range: 10 ... 1000 Hz

- Accuracy: ± 5

- Display: OLED, 0,91"

Material Thickness Meter PCE-TG 75

US$ 522.00

ex. VAT, ex. delivery costs

The material thickness meter can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

- Measuring range: 1.00 ... 225.0 mm / 0.04 ... 8.85"
- Resolution: 0.01 mm at ≤99.99 mm
0.1 mm at ≥100.0 mm
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 500 measured values
- Calibration reference on housing

Thickness Gauge PCE-TG 75

US$ 522.00

ex. VAT, ex. delivery costs

The thickness gauge can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

Thickness Meter PCE-TG 75

US$ 522.00

ex. VAT, ex. delivery costs

The thickness meter can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness meter.

Wind Speed Alarm / Wind Alarm Controller PCE-WSAC 50

US$ 561.00

ex. VAT, ex. delivery costs

PCE-WSAC 50 is an Wind Alarm Controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This Wind Speed Alarm allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

Vibration Test Instrument PCE-VT 1100-ICA incl. ISO Calibration Certificate

US$ 615.00

ex. VAT, ex. delivery costs

Vibration Test Instrument PCE-VT 1100S-ICA incl. ISO Calibration Certificate

US$ 615.00

ex. VAT, ex. delivery costs

- Frequency range: 10 Hz ... 1 kHz

- Measures speed, distance, acceleration

- Holds the reading after each measurement in metric units

- Portable and battery operated

- Needle probe: 45 mm / 1.77 in
- incl. ISO Calibration Certificate

Acceleration Sensor PCE-PVS 10

US$ 713.00

ex. VAT, ex. delivery costs

The Acceleration Sensor has been developed for the continuous monitoring of the vibration speed. The Acceleration Sensor is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.

- Measuring range: ± 12.7 mm / s

- Frequency range: 3 ... 1500 Hz

- Design: vertical connection

- Power supply: 12 ... 24 V DC in current loop

Acceleration Sensor PCE-PVS 20

US$ 713.00

ex. VAT, ex. delivery costs

- Measuring range: ± 25.4 mm / s

- Frequency range: 3 ... 1500 Hz

- Design: vertical connection

- Power supply: 12 ... 24 V DC in current loop

Acceleration Sensor PCE-PVS 30

US$ 713.00

ex. VAT, ex. delivery costs

- Measuring range: ± 12.7 mm / s

- Frequency range: 3 ... 1500 Hz

- Design: horizontal connection

- Power supply: 12 ... 24 V DC in current loop

Vibration Analyser PCE-PVS 30

US$ 713.00

ex. VAT, ex. delivery costs

The Vibration Analyser has been developed for the continuous monitoring of the vibration speed. The Vibration Analyser is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.

- Measuring range: ± 12.7 mm / s

- Frequency range: 3 ... 1500 Hz

- Design: horizontal connection

- Power supply: 12 ... 24 V DC in current loop

Differential Pressure Meter PCE-HVAC 4

US$ 729.00

ex. VAT, ex. delivery costs

The differential pressure meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the differential pressure meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.

- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -96.5 to 3447.5 kPa / -14 to 500 psi / -0.97 to 34.48 bar
- Pressure Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Temperature Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator

Pressure Meter PCE-HVAC 4

US$ 729.00

ex. VAT, ex. delivery costs

The pressure meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the pressure meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.

Ultrasonic Flow Meter PCE-UFM 10

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN10 / 3/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN10 / 3/8"

- Display Type: OLED

- Analog Output: 4 ... 20mA