Paint Thickness Tester PCE-TG 300-ICA incl. ISO calibration certificate

Order no.: PCE-TG 300-ICA
ISO Calibration
US$ 1,711.00
ex. VAT, ex. delivery costs
Paint Thickness Testing
Available in: 10 - 14 days
Thickness gauge PCE-TG 300-ICA incl. ISO Calibration Certificate
Large measuring range / Up to 600 mm / Pulse-echo or echo-echo mode /  For all homogeneous materials / Print function via Bluetooth / USB connection

The PCE-TG 300 is a wall thickness meter with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the PCE-TG 300. For damping or scattering materials such as plastic or cast a special sensor is available. An angled 90° sensor also enables measurements at hard-to-reach measuring points. The speed of sound can be set freely on the wall thickness meter PCE-TG 300 and thus adapted to a wide variety of materials.

The measured values ​​are displayed directly on the easy-to-read TFT color display. Due to the internal memory, which can be read out via the optionally available software, different measuring points can be clearly stored. The non-destructive ultrasound measuring method enables the measurement even on end products. Thanks to the Echo-Echo working mode, even coated workpieces can be measured.

- Large measuring range
- Various sensors available
- Battery operation
- Error and voids detection
- Internal measurement data memory
- Print via Bluetooth
- incl. ISO Calibration Certificate
Measuring range PE: pulse-echo mode 0.65 ... 600 mm (steel)
  EE: echo-echo mode 2.50 ... 60 mm
Accuracy ± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
  H refers to the material thickness of the workpiece
Resolution 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Measurable materials Metals
  Epoxy resin
  And all homogeneous materials
Working modes Pulse echo mode (fault and blower detection)
  Echo-Echo mode (hiding layer thicknesses, eg paints)
Calibration Sound velocity calibration
  Two-point calibration
View mode Normal mode, Scan mode, Difference mode
Units mm / inch
Data transfer Print via Bluetooth / USB 2.0
Storage Non-volatile memory with 100 data groups with 100 data sets each
Operating time Continuous operation 100 h
  Automatic stand-by mode (adjustable)
  Automatic switch-off mode (adjustable)
Power supply 4 x AA battery 1.5V
Display 320 x 240 pixels TFT LCD color display with brightness adjustment
Operating conditions 0 ... 50°C / 32 ... 122°F, ≤ 80% RH not condensing
Storage conditions -20 ... 70°C / -4 ... 158°F, ≤ 80% rh non-condensing
Dimensions 185 x 97 x 40 mm / 7.3 x 3.8 x 1.6 in
Weight 375 g / < 1 lb
Specification of the available sensors for wall thickness gauge PCE-TG 300
Frequency 2.5 MHz
Diameter 14 mm
Measuring range 3 ... 40 mm (steel)
  3 ... 300 mm (steel)
Minimum diameter of pipes  Not suitable for curved materials
Description For damping / scattering materials (plastics, cast iron)
Frequency 5 MHz
Diameter 10 mm
Measuring range 1 ... 600 mm (steel)
Minimum diameter of pipes  20 x 3 mm
Description                                   Normal measurement
NO5 / 90°  
Frequency 5 MHz
Diameter 10
Measuring range 1 ... 600 mm (steel)
Minimum diameter of pipes 20 x 3 mm
Description Normal measurement
Frequency 7 MHz
Diameter 6 mm
Measuring range 0.65 ... 200 mm (steel)
Minimum diameter of pipes 15 x 2 mm
Description Or thin-walled or heavily curved pipes
Frequency 5 MHz
Diameter 12 mm
Measuring range 1 ... 600 mm (steel)
Minimum diameter of pipes 30 mm
Description For high temperatures (max 300°C / 572°F)
Frequency 5 MHz
Diameter 10 mm
Measuring range PE: 2 ... 600 mm, EE: 2.5 ... 100 mm
Minimum diameter of pipes 20 x 3 mm
Description Normal measurement and EE test

1 x Thickness gauge PCE-TG 300-ICA
1 x Sensor P5EE
1 x 100 ml coupling gel
1 x Transport case
4 x AA batteries
1 x User manual
1 x ISO Calibration Certificate