Laboratory

Turbidity Meter PCE-TUM 20
US$ 792.00
ex. VAT, ex. delivery costs

The PCE-TUM 20 is a portable handheld turbidity meter or turbidimeter for water quality analysis. This turbidity measuring device is equipped with a large LCD screen and user-friendly keyboard. The turbidity meter features two automatically switching measuring ranges between 0 ... 50 NTU and 50 ... 1000 NTU for increased accuracy.


- 0 ... 1000 NTU turbidity measuring range
- Infrared LED light source
- Calibration references included

Paint Thickness Tester PCE-TG 120
US$ 798.00
ex. VAT, ex. delivery costs

The Ultrasonic Thickness Gauge PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This ultrasonic thickness gauge works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Paint Gloss Tester PCE-GM 80
US$ 805.00
ex. VAT, ex. delivery costs
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Paint Gloss Tester PCE-PGM 60
US$ 818.00
ex. VAT, ex. delivery costs

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Includes PC-compatible software for detailed analysis
- Light source: D65
- Wave length: 400-700 nm

Magnetometer PCE-MFM 3000-ICA Incl. ISO Calibration Certificate
US$ 831.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-MFM 3000 is a handheld magnetometer that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetometer comes with an external sensor and features an RS-232 port for downloading data to a PC.


- Measurement range: 0 ... 30,000 Gauss DC fields, 0 ... 15,000 Gauss AC 50/60 Hz fields
- Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
- Resolution: 0.1 G / 0.01 mT
- Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields 
- Single axis Hall sensor (Transverse) with auto temp. compensation
- Incl. ISO calibration certificate

Paint Thickness Tester PCE-CT 28-ICA incl. ISO Calibration Certificate
US$ 835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate

Paint Gloss Tester PCE-RM 100
US$ 879.00
ex. VAT, ex. delivery costs
The gloss or opacity meter PCE-RM 100 is used to measure the reflection properties of surfaces related to opacity. The gloss meter PCE-RM 100 is used in tinting glass, film quality, opacity of paper, light shading and the hiding power of various paints, inks, and coatings. 

- Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
- Optical measurement angle: 45º degree angle
- Measuring accuracy: ± 1
- Resolution: 0.1
- Battery operation
- Interface and software
Paint Thickness Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Air Sampler PCE-MPC 15
US$ 916.00
ex. VAT, ex. delivery costs
The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 2.5 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs
Paint Gloss Tester PCE-GM 75-ICA Incl. ISO Calibration Certificate
US$ 920.00
ex. VAT, ex. delivery costs
ISO Calibration
The gloss meter has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the gloss meter enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the gloss meter is a high-precision measuring instrument for fast and easy measurements on surfaces.

- Measuring range up to 1000 GU
- For measurements on small surfaces
- Precise measurements thanks to high accuracy
- Micro-USB interface for the PC connection
- Data memory for later evaluations
- Data memory: 1,245 measured values
- Incl. ISO calibration certificate
Magnetometer PCE-MFM 3500-ICA Incl. ISO Calibration Certificate
US$ 944.00
ex. VAT, ex. delivery costs
ISO Calibration
The magnetometer is a reliable measuring device for measuring the existing magnetic field. This magnetometer is suitable for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields.

- Measuring range up to 30,000 G
- DC Milli Tesla, DC Gauss, Transverse Probe
- AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
- Temperature sensor
- Switchable AC or DC measurement
- Memory: Manual / Automatic
- Incl. ISO calibration certificate
Paint Gloss Tester PCE-GM 80-ICA incl. ISO Calibration Certificate
US$ 990.00
ex. VAT, ex. delivery costs
ISO Calibration
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
Paint Gloss Tester PCE-PGM 60-ICA incl. ISO calibration certificate
US$ 1,002.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
- Includes PC-compatible software for detailed analysis

Magnetometer PCE-MFM 2400
US$ 1,029.00
ex. VAT, ex. delivery costs
With a measuring range of 2,400 mT, the magnetometer covers a wide range of measuring tasks. The magnetometer has an accuracy of 1%. This makes the magnetometer a very precise measuring device.

- Measuring range up to 24,000 G and 2,400 mT
- Measuring direction: transverse
- for measuring static magnetic fields
- Transverse Hall sensor, cable length approx. 3.3 ft., 1 m
Magnetometer PCE-MFM 2400+
US$ 1,029.00
ex. VAT, ex. delivery costs
With a measuring range of 2,400 mT, the magnetometer covers a wide range of measuring tasks. The magnetometer has an accuracy of 1%. This makes the magnetometer a very precise measuring device.

- Measuring range up to 24,000 G and 2,400 mT
- Measuring direction: axial
- for measuring static magnetic fields
- Axial Hall sensor, cable length approx. 2 m / 6.6 ft
Air Sampler PCE-MPC 20
US$ 1,095.00
ex. VAT, ex. delivery costs
The air sampler PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Dust Monitor PCE-MPC 20
US$ 1,095.00
ex. VAT, ex. delivery costs
The dust monitor is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the dust monitor are 0.3, 2.5 and 10 μm.

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
Paint Thickness Tester PCE-CT 80-FN1D5
US$ 1,122.00
ex. VAT, ex. delivery costs
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"