Current Indicator PCE-ND10

Order no.: PCE-ND10
US$ 222.00
PCE-ND10
ex. VAT, ex. delivery costs
Available in: 1-2 Days
Built-in current indicator for fixed installation / illuminated 3.5 "display / 2 alarm outputs Pulse output / Modbus RTU interface / IP 656 Front / phase detection Measurement and display of current, voltage, power, power factor, phase angle ...
The PCE-ND10 built-in current indicator measures 3-phase all network parameters. Current, voltage, and power measurements are no problem for the PCE-ND10 built-in power meter. The current measurement can be done with the built-in power measuring device 3-phase and directly. However, it is also possible to measure high currents by means of transducers using the PCE-ND10 built-in power meter. The voltage measurement takes place directly to 500 V (phase to phase) via the 2 connections on the built-in power meter. The PCE-ND10 built-in power meter is only suitable for operation in 3-phase networks. All measured parameters are shown by the built-in power meter PCE-ND10 on the large, illuminated display. The user can scroll through the parameters via the keys on the front and make all relevant settings for measurements with the built-in power meter. The PCE-ND10 built-in power meter also has alarm relays that allow an alarm to be triggered when the set parameters are exceeded or exceeded. The measured values ​​can be passed via the Modbus RTU interface from the built-in power meter. Via the pulse output, the PCE-ND10 built-in power meter can then transmit the energy to an energy meter / current meter. The front of the PCE-ND10 built-in power meter is protected to IP67. The PCE-ND10 built-in power meter is installed in control panels. The cut-out is 92 x 92 mm.


  • Control panel cutout 92 x 92 mm
  • Measurement of U, I, F, P, Q, S, PF ...
  • Power supply by measuring voltage
  • Alarm function
  • Detection of wrong phasing sequence
  • Pulse output of the effective energy
  • IP 65 on the front
  • Illuminated 3.5 "LC Display
  • Easy installation
  • RS485 Modbus interface

Technical specification
Measured size Display area Measuring range accuracy
Electricity In 1 A 5A 0.00 ... 1500 A 0.00 ... 60000 A 0.005 ... 1.2A AC
0.025 ... 6A AC
± 0.2% of the measuring range
Voltage LN 230 V 290 V 0.0 ... 1.012 MV 0.0 ... 1.200 MV 195 ... 253V AC 246 ... 300V AC ± 0.2% of reading
Voltage LL 400 V 500 V 0.0 ... 1.752 MV 0.0 ... 2,000 MV 340 ... 440V 425 ... 520V ± 0.5% of reading
Frequency 47.0 ... 63.0 Hz 47.0 ... 63.0 Hz ± 0.2% of reading
Wealth -9999 ... 9999 MW -1.52 kW ... 1.52 kW ± 0.5% of the measuring range
Reactive power -9999 ... 9999 Mvar -1.52 ... 1.52 Mvar ± 0.5% of the measuring range
Apparent power 0.00 VA ... 9999 MVA 1.0 VA ... 1.52 VA ± 0.5% of the measuring range
Power factor PF -1 ... 1 - 1 ... 1 ± 1% of the measuring range
Tan φ -1.2 ... 1.2 -1.2 ... 1.2 ± 1% of the measuring range
Cos φ -1 ... 1 -1 ... 1 ± 1% of the measuring range
Φ -180 ... 180 ° - 180 ... 180 ° ± 0.5% of the measuring range
Energy absorbed 0 ... 99.999.999 kWh ± 0.5 v. Measuring range
Energy delivered 0 ... 99.999.999 kWh ± 0.5 v. Measuring range
Acquired blood energy 0 ... 99.999.999 kWh ± 0.5 v. Measuring range
Blown energy 0 ... 99.999.999 kWh ± 0.5 v. Measuring range
THD 0 ... 100% ± 5% of the measuring range

General technical specification for built-in power meter
Relay output 2 outputs Max. 250 V AC / 0.5 A
Pulse output O / C (NPN) Class A according to EN62053-31 Voltage 18 ... 27V Current 10 ... 27 mA
RS485 interface Modbus RTU 8N2 / 8E1 / 8 O1 / (n1 Baud rate 4800/9600/19200/38400 bit / s
Display Monochrome 3.5 "LCD, illuminated
Supply voltage from L3 195 ... 253V AC / 47 ... 62Hz 246 ... 300 V AC / 47 ... 62 Hz
Environmental conditions -20 .. 55 °C / -4 ... 131 °F / 25 to 95% RH
Storage conditions - 30 ... 70 °C / -22 ... 158 °F / non-condensing
Electric security EN 61010-1
Dimensions 96 x 96 x 77 mm / 3.7 x 3.7 x 3 in
Control panel cutout 92 x 92 mm / 3.6 x 3.6 in
mass Approx. 300 g / 10.5 oz
Degree of protection IP 65

delivery
1 x current indicator PCE-ND10
2 x Connection terminals
1 x User manual