Clamp on Tester PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.


- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current: 200 A / 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC at 50 /
  60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

 

Condition Monitoring Phase Rotation Meter PCE-PI1
US$ 102.00
ex. VAT, ex. delivery costs

This Condition Monitoring Phase Rotation Meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the phase rotation meter. The condition monitoring phase rotation meter meets the safety standard CAT III 600 V, IEC 61010.


- Easy operation
- No batteries required
- Robust alligator clips for easy connection
- 3-phase measurements of 40 ... 690 V AC
- Protection class IP 40

 

Current Clamp PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


- AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
- DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 /
  60 Hz
- Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz


Electrical Tester PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

HVAC Meter PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

The HVAC Meter has been designed to detect, indirectly, AC/DC current and frequency. The HVAC Meter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current: 200 A / 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
- Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Mini Clamp Meter PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

Mini Clamp Meter for measuring AC current, AC voltage, DC current and frequency. The Clamp Meter is designed to indirectly detect AC/DC current and frequency. The Clamp Meter has one white LED which illuminates the point of measurement. Users can test the voltage without contact. The small dimensions of this test instrument allow to take measurements in places with limited access. The Clamp Meter is delivered manufacturer calibrated and can be certified according to ISO.


- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8
  digits
- DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 /
  60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Mini Digital Multimeter PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

The Mini Digital Multimeter has been designed to detect, indirectly, AC/DC current and frequency. The Mini Digital Multimeter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Phase Rotation Meter PCE-PI1
US$ 102.00
ex. VAT, ex. delivery costs

This Phase Rotation Meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the phase rotation meter. The phase rotation meter meets the safety standard CAT III 600 V, IEC 61010.


- Easy operation
- No batteries required
- Robust alligator clips for easy connection
- 3-phase measurements of 40 ... 690 V AC
- Protection class IP 40

 

Signal Converter PCE-P17PT-1
US$ 102.00
ex. VAT, ex. delivery costs
The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 ... 20 mA standard signal.

- Signal converter for RTD
- Power supply via electricity loop
- Low installation width 
Signal Converter PCE-P17PT-2
US$ 102.00
ex. VAT, ex. delivery costs
The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 ... 20 mA standard signal.

- Signal converter for RTD
- Power supply via electricity loop
- Low installation width 
Signal Converter PCE-P17U
US$ 102.00
ex. VAT, ex. delivery costs
The signal transducer for 0 ... 10 V PCE P17U converts voltage signals into standard electricity signals

- Converter for 0 to 10 V signals
- Power supply via electricity loop
- Low installation width
Voltmeter PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.


- AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
- DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
- AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
- Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Electrical Tester PCE-DM 15
US$ 100.00
ex. VAT, ex. delivery costs
The Electrical Tester is a multimeter with extensive functions. In addition to the current and voltage resistance measurements, this electrical tester can also be used to measure continuity and temperature with thermocouples.

Measuring function:
- DC voltage
- AC voltage
- Alternating current
- Resistance
- Capacity
- Frequency
- Type K temperature measurement
- Diode test
- Continuity test
USB Kit for PCE- IR10
US$ 100.00
ex. VAT, ex. delivery costs
USB kit includes the USB interface, data cable and software. Enables the transfer of measured values to the PC or laptop.
Voltmeter PCE-DM 15
US$ 100.00
ex. VAT, ex. delivery costs
The Voltmeter is a multi-meter with extensive functions. In addition to the current and voltage resistance measurements, this multimeter can also be used to measure continuity and temperature with thermocouples.

Measuring function:
- DC voltage
- AC voltage
- Alternating current
- Resistance
- Capacity
- Frequency
- Type K temperature measurement
- Diode test
- Continuity test
Frequency Indicator PCE-N24Z
US$ 99.90
ex. VAT, ex. delivery costs
The frequency indicator is used to display AC parameters. The frequency indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this frequency indicator.

- Power supply:
   230V, 110V, 24V, 20 ... 40V AC/DC,
   85 ... 253 V AC/DC (selectable)
- Input signal:
   1 ... 100V, 2.5 ... 250V, 4 ... 400V,
   20 ... 500 Hz, 1 A, 5 A (selectable)
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"
Water Analysis Meter PCE-PH 16
US$ 99.00
ex. VAT, ex. delivery costs
The water analysis meter PCE-PH 16 is a very easy-to-use measuring device for determining the pH value in a wide variety of liquids. Using the BNC connection of the water analysis meter PCE-PH 16, a wide variety of pH electrodes can also be connected to the water analysis meter PCE-PH 16.

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection
Condition Monitoring Voltmeter PCE-ODM 10
US$ 99.00
ex. VAT, ex. delivery costs
This PCE-ODM 10 condition monitoring voltmeter features both automatic and manual ranging and a dual OLED display. The measured values ​​are displayed on the OLED number display up to 6,000 digits and in the bar graph.

Measuring function
- DC DC
- AC voltage AC (TRMS)
- AC + DC TRMS voltage
- DC DC
- AC AC (TRMS)
- 4 ... 20-mA %
- AC AC / Rogowski coil
- Resistance
- Frequency
- Duty cycle
- Capacity
- Temperature / thermocouple