Checkweighing Scale PCE-SD 300C
US$ 911.00
ex. VAT, ex. delivery costs
Verification for Trade / conformity assessment

The checkweighing scale is a low-cost robust verifiable system balances. The calibration of the checkweighing scale is according to the trading class M III. The sturdy foundation of the checkweighing scale is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 300 kg
- Readability: 100 g
- Minimum load: 2 kg
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Automotive Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Car Measuring Device PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Coating Thickness Gauge PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Force Gage PCE-N50F
US$ 904.00
ex. VAT, ex. delivery costs
The force gage is suitable for panel mounting. This force gage can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gage.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Force Gauge PCE-N50F
US$ 904.00
ex. VAT, ex. delivery costs
The force gauge is suitable for panel mounting. This force gauge can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gauge.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Material Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Material Thickness Meter PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Paint Gauge PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Paint Thickness Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Panel Meter PCE-N50F
US$ 904.00
ex. VAT, ex. delivery costs
The panel meter is suitable for panel mounting. This panel meter can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the panel meter.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Surface Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Thickness Gauge PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Thickness Meter PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Benchtop Scale PCE-DPS 25-ICA incl. ISO Calibration Certificate
US$ 901.00
ex. VAT, ex. delivery costs
ISO Calibration
The benchtop scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
Compact Balance PCE-DPS 25-ICA incl. ISO Calibration Certificate
US$ 901.00
ex. VAT, ex. delivery costs
ISO Calibration
The compact balance is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
Counting Scale PCE-DPS 25-ICA incl. ISO Calibration Certificate
US$ 901.00
ex. VAT, ex. delivery costs
ISO Calibration
The counting scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
Inventory Scale PCE-DPS 25-ICA incl. ISO Calibration Certificate
US$ 901.00
ex. VAT, ex. delivery costs
ISO Calibration
The inventory scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate