Cosmetics pH Meter PCE-PH20P
US$ 442.00
ex. VAT, ex. delivery costs
Measurement of pH in cosmetics is a priority test that should be carried out not only to ensure the conformity of the pH of the product with the pH of the skin, but also to ensure good quality, suitable viscosity, colour, scent and to ensure the shelf life of the cosmetics.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, paints, cosmetics
Environmental Meter PCE-PH20P
US$ 442.00
ex. VAT, ex. delivery costs
Measurement of pH in cosmetics with an environmental meter is a priority test that should be carried out not only to ensure the conformity of the pH of the product with the pH of the skin, but also to ensure good quality, suitable viscosity, colour, scent and to ensure the shelf life of the cosmetics.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, paints, cosmetics
Environmental Tester PCE-PH20P
US$ 442.00
ex. VAT, ex. delivery costs
Measurement of pH in cosmetics with an environmental tester is a priority test that should be carried out not only to ensure the conformity of the pH of the product with the pH of the skin, but also to ensure good quality, suitable viscosity, colour, scent and to ensure the shelf life of the cosmetics.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, paints, cosmetics
Temperature Penetration Sensor PT-527 (PT-100 Type B)
US$ 442.00
ex. VAT, ex. delivery costs
PT-100 temperature sensor with beveled tip

- Needle sensor / stainless steel
- Sensor: Pt 100
- Max.temperature: 240 °C / 464 °F
- Response time: 4 seconds
- Insertion area: 200 mm
- Diameter: 5mm
- Accuracy: According to IEC 751 class B
- 3-wire system
- Coiled cable, insulated
- Cable length: 1000 mm
- Cable end stripped
Force and Weight Indicator PCE-DPD-F2
US$ 441.00
ex. VAT, ex. delivery costs
The built-in display is used to indicate the force and weight, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the force and weight indicator makes it possible to display the correct weight in mV / V based on the set sensitivity. The force and weight indicator shows the measured values ​​on a 6-digit LED display. 

- Power supply: 11 ... 60V DC / 24/48V AC
- Input signal: mV / V for force and weighing sensors
- Display: 6 digits, red
- Digit height : 14 mm
Handheld Digital Refractometer PCE-DRP 1 Coffee
US$ 441.00
ex. VAT, ex. delivery costs

PCE-DRP 1 is a handheld digital refractometer used to determine the sugar content / coffee p1 / refractive index of coffee and similar liquids in the 0 ... 50 % Brix / 0 ... 25 coffee p1 / 1.3330 ... 1.4200 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, coffee p1, refractive index, temperature
- Measurement range: 0 ... 50 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix 
- Automatic temperature compensation (ATC)

Handheld Digital Refractometer PCE-DRS 2 Salinity (Salt Content) / Chlorine
US$ 441.00
ex. VAT, ex. delivery costs

PCE-DRS 2 is a handheld digital sodium chloride (NaCl) and chlorine (Cl) refractometer used to determine the salinity or salt content (‰), chlorine content (‰), specific gravity (SG) and refractive index (nD) of liquid. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Salt content, chlorine content, refractive index,
  specific gravity, temperature

- Measurement range: 0 ... 100 ‰ salinity / 0 ... 57 ‰ chlorine 
- Resolution: 1 ‰ / 0.001 SG 
- Accuracy: ±2 ‰ / ±0.002 SG 
- Automatic temperature compensation (ATC)

Panel Meter PCE-DPD-F2
US$ 441.00
ex. VAT, ex. delivery costs
The built-in display is used to indicate the force and weight, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values ​​on a 6-digit LED display. 

- Power supply: 11 ... 60V DC / 24/48V AC
- Input signal: mV / V for force and weighing sensors
- Display: 6 digits, red
- Digit height : 14 mm
Water Analysis Meter PCE-DRS 2 Salinity / Chlorine Refractometer
US$ 441.00
ex. VAT, ex. delivery costs

PCE-DRS 2 is a handheld digital sodium chloride (NaCl) and chlorine (Cl) refractometer used to determine the salinity or salt content (‰), chlorine content (‰), specific gravity (SG) and refractive index (nD) of liquid. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

- Measurement parameters: Salt content, chlorine content, refractive index, specific gravity, temperature
- Measurement range: 0 ... 100 ‰ salinity / 0 ... 57 ‰ chlorine / 1.000 ... 1.070 SG / 1.3330 ... 1.3530 nD / 0 ... +40 °C / +32 ... +104 °
- Resolution: 1 ‰ / 0.001 SG / 0.0001 nD / 0.1 °
- Accuracy: ±2 ‰ / ±0.002 SG / ±0.0003 nD / ±0.5 °C
- Small liquid sample size of just 4 to 5 drops

IoT Meter PCE-HT 420IoT
US$ 436.89
ex. VAT, ex. delivery costs
The IoT meter for temperature and humidity records humidity and air temperature and stores it internally. This compact and robust IoT meter for temperature and humidity in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate control rooms).

- Temperature: -40 ... 70 °C / -40 ... 158 °F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6 °F)
- Operating temperature: -40 ... 80 °C / -40 ... 176 °F, max. 80% rH
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet with MQTT function
- Power supply or PoE (selectable)
Air Humidity Meter PCE-313A
US$ 435.00
ex. VAT, ex. delivery costs

PCE-313A is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital temperature and air humidity meter also has a port for connecting a type-K thermocouple.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Benchtop Scale PCE-BSH 6000-ICA Incl. ISO Calibration Certificate
US$ 435.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-BSH 6000 is a an accurate compact digital scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this precision scale has a USB port for data transfer and printing.

 

- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.3 ... 6000 g / 0.00066 ... 13 lbs
- Readability or resolution: 0.1 g
- Accuracy: ± 0.3 g
- Calibratable
- Incl. ISO calibration certificate
Climate Meter PCE-313A
US$ 435.00
ex. VAT, ex. delivery costs

The PCE-313 A Climate Meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Climate Meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Climate Meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The meter comes manufacturer calibrated (ISO or as an option).


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Compact Balance PCE-BSH 6000-ICA Incl. ISO Calibration Certificate
US$ 435.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-BSH 6000 is a an accurate compact digital scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this precision scale has a USB port for data transfer and printing.

 

- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.3 ... 6000 g / 0.00066 ... 13 lbs
- Readability or resolution: 0.1 g
- Accuracy: ± 0.3 g
- Calibratable
- Incl. ISO calibration certificate
Condition Monitoring Thermometer PCE-313A
US$ 435.00
ex. VAT, ex. delivery costs

The PCE-313 A Thermometer measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The meter comes manufacturer calibrated (ISO or as an option).


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Counting Scale PCE-BSH 6000-ICA Incl. ISO Calibration Certificate
US$ 435.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-BSH 6000-ICA is an accurate compact digital scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this precision scale has a USB port for data transfer and printing.


- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.3 ... 6000 g / 0.00066 ... 13 lbs
- Readability or resolution: 0.1 g
- Accuracy: ± 0.3 g
- Incl. ISO calibration certificate

Crane Scale PCE-HS 300N-ICA incl. ISO Calibration Certificate
US$ 435.00
ex. VAT, ex. delivery costs
ISO Calibration
The crane scale is available with a measuring range of 0 ... 300 kg / 0 ... 661.4 lbs. With an accuracy of ± 1% of the measuring range, the crane scale is a precise measuring device. The LCD display of the crane scale has a digit height of 22 mm and is backlit.

- Measuring range: 0 ... 300 kg / 0 ... 661.4 lbs
- Resolution: 100 g
- Accuracy: ± 1% of full scale
- Units: kg, lb, N
- Including shackles and hooks
- incl. ISO Calibration Certificate
Data Logger for Temperature and Humidity PCE-313A
US$ 435.00
ex. VAT, ex. delivery costs

The data logger for temperature and humidity is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital data logger for temperature and humidity also has a port for connecting a type-K thermocouple.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)