Force Gage PCE-C-R12LFC-H4 series 5-50 kg
US$ 343.00
ex. VAT, ex. delivery costs

The flat miniature force gage has a height of only 4 mm. With a diameter of 12 mm, this miniature force gauge is very compact. This force gauge achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-50 kg / 50-500 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

Force Gage PCE-C-R20LFC-H11 series 5-2000 kg
US$ 343.00
ex. VAT, ex. delivery costs

The flat miniature Force Gage has a height of only 11 mm. With a diameter of 20 mm, this miniature Force Gage is very compact. This Force Gage achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-2000 kg / 50 N - 20 kN
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force Gage nominal load selectable!

Force Gauge PCE-C-R12LFC-H4 series 5-50 kg
US$ 343.00
ex. VAT, ex. delivery costs

The flat miniature force gauge has a height of only 4 mm. With a diameter of 12 mm, this miniature force gauge is very compact. This force gauge achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-50 kg / 50-500 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

Automotive Tester PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC automotive tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC automotive tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Car Measuring Device PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC car measuring device is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC car measuring device.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Clamp Meter PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC clamp meter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC clamp meter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Clamp on Tester PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC clamp on tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC clamp on tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Current Clamp PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC current clamp is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC current clamp.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
DAkkS calibration for sound level meter
US$ 343.00
ex. VAT, ex. delivery costs
DAkkS calibration certificate for sound level meters, certifies the traceability to national test standards. In this case for the DIN ISO 17025 standard.

- DAkkS calibration
- 2 point calibration 94 dB and 124 dB
- DIN ISO 17025 standard

N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.
Digital Multimeter PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC digital multimeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC digital multimeter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Durometer PCE-DX-AS-ICA Shore A incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Electrical Tester PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC electrical tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC electrical tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Hardness Tester PCE-DX-AS-ICA Shore A incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

HVAC Meter PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC HVAC meter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC HVAC meter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
NDT Tester PCE-DX-AS-ICA Shore A incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Panel Indicator PCE-DPD-Cx Series
US$ 343.00
ex. VAT, ex. delivery costs
This digital panel indicator with stopwatch with start, stop and reset input functions. The digital panel indicator has a size of 96 x 48 mm and displays the values ​​on a 6-digit red LED display of 14 mm. It has different reading formats available in both decimal and sexagesimal format, with a configurable preset value and different counting functions.

- Digital panel indicator with stopwatch function
- LED display 6 digits red 14 mm color
- Decimal or sexagesimal reading format
- Functions: Start / Stop / Reset inputs, On power-up, Trigger sense, ...
Voltmeter PCE-DC 20-ICA incl. ISO Calibration Certificate
US$ 343.00
ex. VAT, ex. delivery costs
ISO Calibration
The AC/DC voltmeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC voltmeter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Force Gauge PCE-C-R20LFC-H11 series 5-2000 kg
US$ 343.00
ex. VAT, ex. delivery costs

The flat miniature Force Gauge has a height of only 11 mm. With a diameter of 20 mm, this miniature Force Gauge is very compact. This Force Gauge achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-2000 kg / 50 N - 20 kN
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force Gauge nominal load selectable!