Query results | PCE Instruments

US$ 2,202.00

ex. VAT, ex. delivery costs

A color lighting chamber is used wherever products must have the same color properties during production. A color lighting chamber contributes to quality control. The color lighting chamber is a simulation instrument which is capable of displaying certain situations in order to analyze color characteristics of individual samples by means of different light types.

- Color assessment under different light types
- With hour counter
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

Material Surface Roughness Tester PCE-RT 2000

US$ 2,528.00

ex. VAT, ex. delivery costs

The material surface roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

- Measuring ranges Ra, Rq, Rc: 0.005 µm ... 16 µm / 0.197 µinch ... 629.9 µinch
- Measurement accuracy: <± 10%
- Micro USB interface
- 3 different cut-off wavelengths
- PC software

Paint Roughness Tester PCE-RT 2000

US$ 2,528.00

ex. VAT, ex. delivery costs

The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

- Measuring ranges Ra, Rq, Rc: 0.005 µm ... 16 µm / 0.197 µinch ... 629.9 µinch
- Measurement accuracy: <± 10%
- Micro USB interface
- 3 different cut-off wavelengths
- PC software

Profilometer PCE-RT 2000

US$ 2,528.00

ex. VAT, ex. delivery costs

The profilometer PCE-RT 2000 is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000 can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezo probe. The profilometer PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery

Roughness Tester PCE-RT 2000

US$ 2,528.00

ex. VAT, ex. delivery costs

Surface Tester PCE-RT 2000

US$ 2,528.00

ex. VAT, ex. delivery costs

The surface tester PCE-RT 2000 is used for accurate measurement of surface roughness. The surface tester PCE-RT 2000 can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezo probe. The surface tester PCE-RT 2000 can be purchased here in our online shop.

Air Quality Meter Gas-Pro-3

US$ 2,525.03

ex. VAT, ex. delivery costs

This Air Quality Meter Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Air Quality Meter Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

- Purpose: Personal protection
- Sensor type: CO / CO2 / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. Please email jmu@pce-
instruments.com (UK) or rhe@pce-instruments.com (US) for details

Carbon Dioxide Meter Gas-Pro-3

US$ 2,525.03

ex. VAT, ex. delivery costs

This Carbon Dioxide Meter Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Carbon Dioxide Meter Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

CO2 Analyser Gas-Pro-3

US$ 2,525.03

ex. VAT, ex. delivery costs

This CO2 Analyser Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the CO2 Analyser Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Gas Leak Detector Gas-Pro-3

US$ 2,525.03

ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Clamp-on Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 2,520.00

ex. VAT, ex. delivery costs

The Clamp-on Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Clamp-on Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
- incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 2,520.00

ex. VAT, ex. delivery costs

The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1%
(of the measured value)
- Pipe size: DN 25 ... 1200 mm
- Interface: RS232 & RS485
- Relay output
- incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 2,520.00

ex. VAT, ex. delivery costs

Ultrasonic Flow Tester PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 2,520.00

ex. VAT, ex. delivery costs

The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Ultrasonic HVAC Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 2,520.00

ex. VAT, ex. delivery costs

The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Vibration Meter PCE-VM 20

US$ 2,495.00

ex. VAT, ex. delivery costs

The vibration meter PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration meter can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816

Vibration Recorder PCE-VM 20

US$ 2,495.00

ex. VAT, ex. delivery costs

The vibration recorder PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration recorder can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

Accelerometer PCE-VM 20

US$ 2,495.00

ex. VAT, ex. delivery costs

The accelerometer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The accelerometer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.