Color Viewing Box PCE-CIC 10-US
US$ 2,202.00
ex. VAT, ex. delivery costs

A color lighting chamber is used wherever products must have the same color properties during production. A color lighting chamber contributes to quality control. The color lighting chamber is a simulation instrument which is capable of displaying certain situations in order to analyze color characteristics of individual samples by means of different light types.


- Color assessment under different light types
- With hour counter
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

 

Force Gage PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate
US$ 2,349.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Force Gauge PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate
US$ 2,349.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Torque Meter PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate
US$ 2,349.00
ex. VAT, ex. delivery costs
ISO Calibration
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Portable Ultrasonic Flow Meter Kit PCE-TDS 100HSH
US$ 2,343.00
ex. VAT, ex. delivery costs
Topseller

PCE-TDS 100HSH is a portable handheld clamp-on Portable Ultrasonic Flow Meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1

Ultrasonic Flow Meter Kit PCE-TDS 100HSH
US$ 2,343.00
ex. VAT, ex. delivery costs
Topseller

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1

Ultrasonic Flow Meter Kit PCE-TDS 100HSH
US$ 2,343.00
ex. VAT, ex. delivery costs
Topseller

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
Pipe size: DN 15 … 700, 20 … 720 mm
- Sensor temperature range: 32 ... 320°F
- Sensor installation: V, (N,W)
- incl. sensors TDS-M1 and TDS-S1

Ultrasonic Flow Test Instrument Kit PCE-TDS 100HSH
US$ 2,343.00
ex. VAT, ex. delivery costs
Topseller

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1

Ultrasonic Flow Tester Kit PCE-TDS 100HSH
US$ 2,343.00
ex. VAT, ex. delivery costs
Topseller

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1

Ultrasonic HVAC Meter Kit PCE-TDS 100HSH
US$ 2,343.00
ex. VAT, ex. delivery costs
Topseller

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1

Stroboscope RT STROBE 5000 LED
US$ 2,336.00
ex. VAT, ex. delivery costs

The main advantage of a steady-state stroboscope RT STROBE 5000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first part which has to be replaced.


- Frequency range 0…120,000 FPM
- Low-wear LED light trigger
- Illumination level 300 x 500 mm
- High intensity of light
- 120 LEDs

 

Stroboscope RT STROBE 5000 LED
US$ 2,336.00
ex. VAT, ex. delivery costs

The main advantage of a steady-state stroboscope RT STROBE 5000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first part which has to be replaced.

- Frequency range: 0…120,000 FPM
- Low-wear LED light trigger
- Illumination level 300 x 500 mm
- High intensity of light
- 120 LEDs

 

Color Meter PCE-CSM 3
US$ 2,335.00
ex. VAT, ex. delivery costs

The color meter PCE-CSM 3 was developed for quality control and inspection and offers a very high accuracy reading. You can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the color meter, the reading can be stored as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily. Delta pass/fail indication.


- CIE L*a*b*C*h or CIE L*a*b*
- Measuring geometry 8°/d
- White calibration disk
- Stores 100 reference values and 20,000 samples
- Measuring aperture is 8 mm
- Optional liquid sample kit listed under accessories

 

Color Test Instrument PCE-CSM 3
US$ 2,335.00
ex. VAT, ex. delivery costs
The color meter PCE-CSM 3 was developed for quality control and offers a very high accuracy reading. When using the color meter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with these color test instruments, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily.


- CIE L*a*b*C*h, CIE L*a*b*
- Measuring geometry 8°/d
- white calibration
- Stores 100 reference values and 20,000 samples
- measuring aperture is 8 mm
- optional liquid sample kit listed under accessories

Colorimeter PCE-CSM 3
US$ 2,335.00
ex. VAT, ex. delivery costs

The colorimeter PCE-CSM 3 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE L*a*b*C*h, CIE L*a*b*
- Measuring geometry 8°/d
- White calibration standard included
- Stores 100 reference values and 20,000 samples
- Measuring aperture is 8 mm
- optional liquid sample kit listed under accessories

 

Paint Test Equipment PCE-CSM 3
US$ 2,335.00
ex. VAT, ex. delivery costs

The paint test equipment was developed for quality control and offers a high accuracy. When using the paint test equipment, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the paint test equipment, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE L*a*b*C*h, CIE L*a*b*
- Measuring geometry 8°/d
- White calibration standard included
- Stores 100 reference values and 20,000 samples
- Measuring aperture is 8 mm
- optional liquid sample kit listed under accessories

 

Spectrophotometer PCE-CSM 3
US$ 2,335.00
ex. VAT, ex. delivery costs

The Spectrophotometer PCE-CSM 3 was developed for quality control and offers a high accuracy. When using the Spectrophotometer, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the Spectrophotometer, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE L*a*b*C*h, CIE L*a*b*
- Measuring geometry 8°/d
- White calibration standard included
- Stores 100 reference values and 20,000 samples
- Measuring aperture is 8 mm
- optional liquid sample kit listed under accessories

 

Surface Testing - Colorimeter PCE-CSM 3
US$ 2,335.00
ex. VAT, ex. delivery costs

The colorimeter PCE-CSM 3 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE L*a*b*C*h, CIE L*a*b*
- Measuring geometry 8°/d
- White calibration standard included
- Stores 100 reference values and 20,000 samples
- Measuring aperture is 8 mm
- Optional test box for liquid sample testing