Durometer for Metals PCE-2800
US$ 1,938.00
ex. VAT, ex. delivery costs

PCE-2800 is a portable handheld material hardness tester or durometer designed for the quick and easy surface hardness testing of metals. This user-friendly device displays measurements in Rockwell A, B & C (HRA, HRB & HRC), Vickers (HV), Brinell (HB), Shore (HS) and Leeb (HLD) hardness units. It also indicates the tensile strength (N / mm²).

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 350-800 HLD, 59.1-85.8 HRA, 13.5-101.7 HRB, 20-68.5 HRC, 19-651 HB, 80-976 HV, , 32.2-99.5 HS, 374-2652 (N / mm²)
- Accuracy: ± 0.8%, Repeatability: ± 0.8%
- Impact Device: Type D (external probe with 1.5 m / .06 in long cable)
- Data interface: USB 1.1 port; Internal memory: Stores up to 100 data sets
PC-compatible software and data cable for analysis, reporting and archival.
- Printer is built into the device

Concrete Hardness Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Concrete Rebound Test Hammer PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The concrete rebound test hammer is an analog measuring device to determine concrete strength. The measuring method of the concrete rebound test hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete rebound test hammer. The resulting rebound enables the concrete rebound test hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Durometer PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Material Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
NDT Tester - Hardness Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The NDT tester - hardness tester is an analog measuring device to determine concrete strength. The measuring method of the NDT tester - hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the NDT tester - hardness tester. The resulting rebound enables the NDT tester - hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Roll Hardness Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Surface Testing - Concrete Hammer PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The surface testing - concrete hammer is an analog measuring device to determine concrete strength. The measuring method of the surface testing - concrete hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the surface testing - concrete hammer. The resulting rebound enables the surface testing - concrete hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Automotive Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The automotive tester is a versatile measuring device. This is made possible by the various optional sensors on the automotive tester. Thanks to the surface temperature sensor, the automotive tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Coating Thickness Gauge PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The coating thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the coating thickness gauge. Thanks to the surface temperature sensor, the coating thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Condition Monitoring Surface Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The condition monitoring surface tester is a versatile measuring device. This is made possible by the various optional sensors on the condition monitoring surface tester. Thanks to the surface temperature sensor, the condition monitoring surface tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Material Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The material tester is a versatile measuring device. This is made possible by the various optional sensors on the material tester. Thanks to the surface temperature sensor, the material tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
NDT Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The NDT tester is a versatile measuring device. This is made possible by the various optional sensors on the NDT tester. Thanks to the surface temperature sensor, the NDT tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Paint Thickness Gauge PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The paint thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the paint thickness gauge. Thanks to the surface temperature sensor, the paint thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Paint Thickness Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Surface Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The surface tester is a versatile measuring device. This is made possible by the various optional sensors on the surface tester. Thanks to the surface temperature sensor, the surface tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Thickness Gauge PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Thickness Meter PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The Thickness Meter is a versatile measuring device. This is made possible by the various optional sensors on the Thickness Meter. Thanks to the surface temperature sensor, the Thickness Meter can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)