Query results | PCE Instruments

US$ 1,280.00

ex. VAT, ex. delivery costs

The car measuring device can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the car measuring device covers a wide range of measuring tasks.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
- Data memory for 2000 readings
- Fe substrates such as: steel and iron
- NFe substances such as: aluminum and copper
- Practical V-groove on the measuring heads

Gas Detector Xgard Type 1 CL2

US$ 1,276.31

ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas sas detector used to warn for gases (Chlorine, CL₂, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL₂, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector Xgard Type 1 CL2

US$ 1,276.31

ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL₂, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL₂, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

Force Gage PCE-DFG N 500-ICA incl. ISO Calibration Certificate

US$ 1,275.00

ex. VAT, ex. delivery costs

Digital Force Gage PCE-DFG N 500-ICA for tensile force measurement and pressure force measurement up to 500 N. The digital force gage is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Force Gauge PCE-DFG N 500-ICA incl. ISO Calibration Certificate

US$ 1,275.00

ex. VAT, ex. delivery costs

Digital force gauge PCE-DFG N 500-ICA for tensile force measurement and pressure force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

Coating Thickness Gauge PCE-CT 80HP-FN1D5

US$ 1,267.00

ex. VAT, ex. delivery costs

The automotive tester can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the automotive tester covers a wide range of measuring tasks.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
- Data memory for 2000 readings
- Fe substrates such as: steel and iron
- NFe substances such as: aluminum and copper
- Practical V-groove on the measuring heads

1-Phase Power Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate

Clamp Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Clamp on Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Current Clamp PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 Current Clamp is used to measure the current of 1- or 3-phase loads. This Current Clamp is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Current Clamp.

Digital Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Electrical Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

HVAC Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.

Portable Power Analyzer PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 Portable Power Analyzer is used to measure the current of 1- or 3-phase loads. This Portable Power Analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Portable Power Analyzer.

Power Analyzer PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.

Power Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Three-Phase Power Meter PCE-GPA 50-ICA incl ISO Calibration

US$ 1,264.00

ex. VAT, ex. delivery costs

The 3-phase power meter / 3-phase power analyzer is used to measure the current of 1- or 3-phase loads. This 3-phase power meter / 3-phase power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Voltmeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.