Industrial Measurement Products and Solutions
Order no.: PCE-VT 2700

PCE-VT 2700 is a factory-calibrated (certificate included) portable digital battery-powered accelerometer used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) /
  9 Hz ... 10 kHz
(in 10 kHz mode) acceleration; 10 Hz ... 1 kHz velocity /
  displacement
- Resolution: 0.1 m/s2 / 0.1 yd/s2; 0.1 mm/s / 0.003 in/s;
  1 µm / 3.3814e-14 oz ; 1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
US$ 667.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Air and Temperature Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

 

Manufacturer: PCE Instruments
US$ 379.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an air flow meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air flow meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 457.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-007-ICA

This air flow meter is very economical. With this air flow meter you can measure wind speed and air temperature.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 509.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-007-ICA

This air flow meter is very economical. With this air flow meter you can measure wind speed and air temperature.

 

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 509.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-009-ICA

Air flow meter to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of air flow meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 736.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423-ICA
The PCE-423 is a high resolution air flow meter to measure air velocity and temperature in varied situations. The air flow meter belongs in the basic toolkit for professionals working with ventilation systems, as well as being useful in institutional research and development.


- Measurement range:m/s: 0.1 ... 25.0 m/s, 0.2 ... 55.8 mph
- Measures air velocity and temperature
- Suitable for low velocity air flow
- multiple measurement units available
- Large LCD display
- Data-Hold function
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 475.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423-ICA
The PCE-423 is a high resolution air flow meter to measure air velocity and temperature in varied situations. The air flow meter belongs in the basic toolkit for professionals working with ventilation systems, as well as being useful in institutional research and development.


- Measurement range: m/s: 0.1 ... 25.0 m/s, 0.2 ... 55.8 mph
- Measures air velocity and temperature
- Suitable for low velocity air flow
- multiple measurement units available
- Large LCD display
- Data-Hold function
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 475.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Air Flow Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
US$ 379.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WL 1-ICA

The air flow meter PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the air flow meter for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The air flow meter PCE-WL 1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
US$ 729.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A air humidity meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A air humidity meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the air humidity meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 420.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-780-ICA

The air humidity meter PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 279.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HT 71N-ICA

The PCE-HT 71N air humidity meter detects air temperature and humidity and stores readings in its internal memory. The air humidity meter has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.


- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
- Incl. ISO calibration certificate 

Manufacturer: PCE Instruments
US$ 222.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 air humidity meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the air humidity meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 291.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HT110-ICA

The PCE-HT110-ICA Air Humidity Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110-ICA is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 342.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HT110-ICA

The PCE-HT110-ICA Air Quality Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110-ICA is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 342.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-007-ICA

This Data Logger meter is very economical. With this Data Logger meter you can measure wind speed and air temperature.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 509.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-009-ICA

Data logger to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of airflow meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 736.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an air velocity meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air velocity meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
US$ 457.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-007-ICA

This air velocity meter is very economical. With this air velocity meter you can measure wind speed and air temperature.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 509.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer