Industrial Measurement Products and Solutions
Order no.: PCE-IVE 330

The PCE-IVE 330 Industrial Endoscope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m telescopic rod of the industrial endoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the industrial endoscope is supported by the flexible camera head.


- flexible camera head
- 8" LCD monitor
- up to three meters long
- diameter of the camera: 23 mm / 0.9 in
- memory function

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU

 

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 industrial borescope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the borescope, it is also possible to view areas that are difficult to access. Visual monitoring with the borescope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft  telescopic rod of the inspection camera, it is also possible to view areas that are difficult to access. Visual monitoring with the inspection camera is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IGM 60

The NDT tester or gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 

 

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 videoscope or inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the videoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the videoscope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TG 110

The material thickness meter PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal material thickness meter for water pipes, steam pipes and pipes for chemicals.


- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor

Manufacturer: PCE Instruments
US$ 1,045.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TG 110

The thickness meter PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal thickness meter for water pipes, steam pipes and pipes for chemicals. 


- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in  (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor

 

Manufacturer: PCE Instruments
US$ 1,045.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TG 110

The Ultrasonic Thickness Tester PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal ultrasonic thickness tester for water pipes, steam pipes and pipes for chemicals.


- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor

Manufacturer: PCE Instruments
US$ 1,045.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 100

The NDT tester - gloss meter is used for measuring on flat surfaces and operates on the principle of a reflectometer. The compact design and the handy size of the gloss meter makes it useful for on-site measurements or during operation of production plant. All test instruments are delivered manufacturer calibrated and can be certified to ISO as an option.


- Measurement angles 20º, 60º and 85º degree angles
- Measurement range: 0.0 to 200 gloss units
- Standards: ISO 2813, GB 9754-88, GB 9966.5

 

Manufacturer: PCE Instruments
US$ 1,044.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is an absolute moisture meter or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a benchtop scale or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a LAB scale or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a laboratory balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a halogen moisture balance that functions on the gravimetric or loss on drying (LOD) principle. The moisture balance uses the halogen method to dry the material sample. The moisture balance determines moisture content based on the weight difference before and after the drying procedure. Calibration of the moisture balance can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 15 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a halogen moisture meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- RS-232 interface or port

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a halogen moisture test instrument or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

 

- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
US$ 1,038.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer